MIDREAL
Menu

I'll never buy Framework hardware again

https://poolp.org/posts/2026-11-20/ill-never-buy-framework-hardware-again/ (poolp.org)

802 points | 40h ago | Discuss on Hacker News | Back to Radar

Comments

thewillowcat 40h ago on HN
I have a Framework 13. I really like it, and I would buy Framework hardware again. But I also wouldn't buy one for an engineer at my company to use as a daily driver in a world where the MacBook Pro exists. I think this misreads where Framework is in its stage of development.
tetsuo420 40h ago on HN
Could you elaborate on that, if you don't mind? I was thinking about either getting the 13 Pro or a second-hand M2 with Asahi and this would help me decide.
kami23 40h ago on HN
Not OP but a developer not working is going to much more expensive in loss of productivity than whatever you save in having modular hardware or cool points.

Repairability is fine, but when working at the scale that you even have a handful or employees and no dedicated IT or even slightly larger than that the hardware shouldn't be a work stoppage, so having hot spares for folks to be swapped immediately and having higher quality machines pays off very quickly.

Mac laptops are some of the highest quality longest last laptops I've worked with, I ran my 2015 mbp into the ground, it still works and was fine with Linux on it after all these years, but it made it a no brainer for me to get a Neo this year, if I get a decade out of this guy as well I will be happy.

OJFord 36h ago on HN
> Repairability is fine, but when working at the scale that you even have a handful or employees and no dedicated IT or even slightly larger than that the hardware shouldn't be a work stoppage, so having hot spares for folks to be swapped immediately and having higher quality machines pays off very quickly.

In theory though, this somewhere Framework really shines: there's no hotter spare than a fresh part in a machine that's otherwise the same.

Maybe you work somewhere where your laptop's a thin client for you to access a dev environment remotely, but otherwise if my employer hands me a 'hot spare' I'm going to spend the rest of the day getting set up again.

kami23 27h ago on HN
I just had Claude write onboarding guides for the new engineer on the team and we had him setup with the toolchain for agentic engineering in 30 minutes, would be faster if I cared to optimize, but it worked. No one reads the guide but agents, and they document well enough to do the work quickly, and design scripts along the way.
thewillowcat 40h ago on HN
The MBP is physically robust and I don't have to apply any effort to keep it running perfectly. It just works. (To be clear I use MacOS on it.)

It takes time and effort to keep Linux running smoothly on my Framework. I don't feel as confident about throwing the Framework in a backpack and traveling with it. I don't expect it to take as much physical abuse over time.

rathboma 40h ago on HN
I haven't had any Linux stability or compatibility problems on mine, just terrible standby battery life. Like worse than my 10 year old Thinkpad X1 which also runs Linux.

What do you think to the new framework pro models?

thewillowcat 39h ago on HN
My battery experience is similar. I have not tried to improve/troubleshoot it, since it isn't an issue for my pattern of use.
lnrd 39h ago on HN
Not OP but Apple hardware is very reliable, they have been doing hardware for decades, they control everything in their supply chain and design devices all the way from the silicon to the software. They also tend to use quality parts for all components, even the ones that don't draw attention in the reviews and that other manufacturer might cheap out on.

On top of that customer support is very good usually. You just call them or go to a store and they will offer a solution, but it could get very expensive if you are out of warranty, that's really the biggest downside. As a work machine for a business its something will just work out of the box and continue to work for years with very little maintenance, makes a lot of sense as a business decision.

karussell 39h ago on HN
Note that M2+Asahi works really well and I can highly recommend to try it. However, battery life time is significantly shorter than with MacOS and there was no sleep mode. I wrote a blog post a few months ago: https://navigatone.com/2026/03/21/asahi-linux-for-daily-usag...
Tade0 33h ago on HN
Not the gp, but I own a Framework 16 and my work machine is a MBP.

Framework in its current shape is for tinkerers and enthusiasts, who are okay with stuff breaking and brainstorming with like-minded people how to deal with the fact.

Meanwhile the MBP is a workhorse which does what it's supposed to and when not there's AppleCare to replace it.

I've preorded a 3rd party dual USB-C expansion card for my Framework, because I love the idea of having even more ports for no reason.

The USB-A dongle card released recently is also on my list:

https://frame.work/pl/en/products/framework-wireless-touchpa...

The main selling point of this platform is that it's flexible, but unfortunately it's something so unheard of, that reliability suffers.

LtWorf 40h ago on HN
What if the engineer wants to use the keyboard?
Analemma_ 40h ago on HN
You’re about five years too late with this joke.
delecti 40h ago on HN
Macbook keyboards might not be outright faulty anymore, but they still kinda suck. Over the past ~year I've used a 6 year old Microsoft Surface laptop, a brand new M5 Macbook Pro, and a ~4 year old HP, and enjoy the Macbook's keyboard by far the least of the bunch.
DroneBetter 39h ago on HN
ultra-low-travel-distance keyboards are an acquired taste, but I think using them exclusively for long enough has caused my opinions to flip to thinking all keyboards (even desktop ones) should be made more like them
radicaldreamer 37h ago on HN
I'm a big fan of them, but they just don't work well for a lot of people who are in dusty environments or don't wash their hands extremely often like some of us.

I've always been a big fan of the butterfly keyboards although my external keyboards are usually Topres or the rarer Fujitsu Libertouch variety.

DroneBetter 39h ago on HN
the most notorious keyboard was the 2016 MacBook Pro's butterfly mechanism, so possibly even a decade late
LtWorf 31h ago on HN
Uh? I had to use a mac this year and it sucked. I was not joking.

Plus the OS doesn't allow remapping the keyboard to something sane.

dghlsakjg 39h ago on HN
You're commenting on an article about how framework couldn't fix a completely defective (not just fragile desing) keyboard through months of support, and a visit to their own repair center.

Apple meanwhile fixed their keyboard issues last decade.

LtWorf 31h ago on HN
They didn't "fix" it… it sucks slightly less.
toomim 40h ago on HN
Well sure, if you're willing to use MacOS.

But Linux sucks on the Mac. It still doesn't support sleep.

teaearlgraycold 39h ago on HN
The best thing I can say about MacOS is that it’s okay. But when you’re aware that Windows exists MacOS starts to look pretty good by comparison. Still, Debian would be my first choice. But any time I look at the options the Mac hardware makes me go with Apple.
Brass 40h ago on HN
Wow.

Stinks because I need to replace an aging MacBook and was leaning Framework.

Is Omarchy on a MacBook the way to go for mobile Linux these days or?

jjice 40h ago on HN
FWIW I've been using a Framework AMD 13 for a bit over three years now without any issues.
tetsuo420 40h ago on HN
anything you would highlight about it (good or bad)? how is the battery life?
jjice 40h ago on HN
Battery life is fine, but I wouldn't call it good. It's my biggest gripe by far. Sleep with Linux burns 1% per hour. Actual usage battery life isn't awful, but I would need a charge mid day for a full day of usage.

My work MacBook crushes it in battery. That thing is so efficient. I have seen the new Intel Frameworks are looking good on battery, but I don't have hands on experience there.

If I didn't care for the repairability and modularity, I'd go MacBook for sure, which are generally long lasting machines as well in my experience.

tetsuo420 39h ago on HN
thank you!
Frotag 38h ago on HN
I have a FW 16 (first gen with the AMD 7040). It's still going strong after 3 years of daily use, mostly docked but stand-alone maybe one or two days a week.

I don't use it on battery much but currently it'll last maybe 4-6 hours? (Assuming typical web browsing / videos / coding.) So definitely worse than macbooks, maybe an hour or so less than my brother's (new) intel ultra laptop.

Build quality has been pretty solid. Only things that have broken have been my fault (keyboard stopped working after the Nth spill, usb connector (for power) is a bit loose after years of sloppy aim) and have been a breeze to replace.

Perf-wise, my only complaint is that I wasn't expecting usb bandwidth to be a bottleneck. Turns out I can't drive 3x 4k screens and fast-charge and have full ethernet bandwidth all at once (each to a different usb port, no dock). But I guess that might've been a unrealistic expectation.

I guess I should note that I've had a minor issue with the amd igpu crashing in a certain game under very specific conditions and the laptop occasionally failing to sleep / wake from sleep. But iirc the former is amd's fault and the latter is unfortunately par for the course on linux ime.

But yeah overall a positive experience. The laptop was definitely pricey for the specs but I knew that I'd be paying for the modularity + small-volume going in. It's also nice for peace of mind, not having to handle it as carefully, knowing its fix-able and trusting FW not to cheap out hinges and the like (previous 4 laptops have all died from hardware after 2-3yrs).

dr_kiszonka 40h ago on HN
If you haven't had any issues with your laptop, then you presumably didn't interact with customer support? Or did you not have issues with customer support specifically?

Perhaps OP was unlucky, but outside of this - I don't understand why there are so many companies with good products but terrible customer service. Shouldn't customer service be considered a part of the product?

jjice 40h ago on HN
Yeah no contact with their support so I don't have any commentary there. I do agree that good CS is critical to a small company's product like this. I imagine it's hard to scale that up. I hope they get that figured.

Never feels good being left helpless due to (lack of) customer support.

cwnyth 40h ago on HN
I was looking to replace my Lenovo with a Framework. Guess that's out now. What a shame, as I prefer to support Linux-friendly vendors.
hollowonepl 40h ago on HN
Choose System76 computers instead of Framework. Framework comes with nice promise but lack of commitment to make it true and globally available. Very US centric company that in the first pre-sales contact smelled fishy and it seems I luckily dropped of considering them at right stage!
coldpie 40h ago on HN
I've been using a Framework for a few years. I'm still happy with it and would get one again if I needed one. However I've never had to contact support, so I can't say anything positive or negative about that experience.
cwnyth 33h ago on HN
Yeah, I'm sure if I get a good one, I'll be happy with it, but I don't want to and can't afford to get unlucky and get stuck with a lemon and a bill.
MaKey 40h ago on HN
Lenovo is Linux-friendly though. A lot of their laptops are Ubuntu certified.
cwnyth 33h ago on HN
It could be my specific one. I'm using an IdeaPad Flex with Fedora, and it's had a ton of issues. I'm sure some of it is specific to Linux, but the fingerprint reader isn't supported and the BIOS drives are Windows-specific.

I do generally like my laptop, and got it for a great deal, but it's a bit long in the tooth now.

opan 21h ago on HN
ThinkPads specifically are kinda their own deal, I don't think highly of Lenovo in general. Not all ThinkPads are equal on top of that. Avoid the extra slim ones like T*s or X1 Carbon, sadly probably avoid the whole X series now. T series or P series should be solid. If buying used, check Wikipedia to make sure it's not a model with soldered RAM. There were always some weird lower quality models (common advice used to be to stick to X/T/W series, avoid A and R and such) but the main ones have had some issues now as well. I am happy with my ThinkPad T14 Gen 5, AMD model at least. I would personally never buy or recommend an IdeaPad.
cwnyth 6h ago on HN
The IdeaPad wasn't bad, and I at the time got a lot of use out of the folding aspect to it, even more so once some keys stopped working (my fault, no blame to Lenovo there). Good info on the Thinkpad, though. I'll look into Thinkpad more, but I generally prefer larger screens, so perhaps a P17 or something.
wvenable 40h ago on HN
Basing your purchasing decisions on a single bad experience anecdote just means that there won't be a single vendor that will satisfy you.
cwnyth 33h ago on HN
There are actually several, not one, and it's specifically Framework's support process in the few mentioned here that is driving me away from them.

One anecdote: Could be a one off? Several people having the exact same problem. Nah, I don't want to chance it.

Funny enough, too, my current laptop is a replacement. The first one I bought had some issue. I brought it back to Microcenter and they replaced it without any issues. I've had to return a laptop to Dell before, and again, no real problem doing so. OP's story sounds like a nightmare to me.

toomim 40h ago on HN
I like my Framework Pro 13 much more than my Thinkpad X1 Carbon.
ffemac 39h ago on HN
Stay with Lenovo. Trust me. I own Framework hardware and Thinkpads.
nticompass 40h ago on HN
Why would you consider Omarchy over all the other, much better, less problematic Linux distros?
dghlsakjg 39h ago on HN
Omarchy is problematic? Or do you mean DHH, Lutke, et. al's opinions on social issues?

Its a linux distro. You can use a tool - especially an open source, free one - without supporting the founders.

If you have a problem with free as in speech, Linux and FOSS isn't for you.

g-b-r 39h ago on HN
It's a vibecoded linux distro
BoingBoomTschak 39h ago on HN
Without even talking about any of that, isn't it hastily vibe-ducktaped together?
dghlsakjg 30h ago on HN
AI contributions are allowed on the linux kernel too now.

Is your objection based on the use of AI at all? or do you have something specific that the maintainers of Omarchy did with AI that you can cite as problematic. Most of Omarchy is just a bunch of preselected defaults on top of Arch, so there’s not really a lot of point to having humans format nix package lists.

BoingBoomTschak 24h ago on HN
> AI contributions are allowed on the linux kernel too now.

You're being disingenuous right now, stop that or go back to Reddit.

> Is your objection based on the use of AI at all?

Personally, it is. Objectively, I'm sure they have more than simple config files to maintain: the glue linking Hyprland and Quickshell, their CLI tool used to interact with plugins, etc... basically everything in there https://github.com/omacom/omarchy

I'll never trust such a distro to be as stable as Gentoo, for example.

But in truth, they were never aiming for the Gentoo or Alpine crowd, so my opinion really doesn't matter. The real competition is probably PopOS.

------

First look at the first script I could find (https://github.com/omacom/omarchy/blob/quattro/bin/omarchy) and I don't see a `set -eu` and some generally bad shell scripting that doesn't even now about case or parameter expansion.

...Wait, they use bash/shell extensively and don't even have a ShellCheck CI? What is this clown distro? Use a real programming language if you don't want to bother.

dghlsakjg 11h ago on HN
> You're being disingenuous right now, stop that or go back to Reddit.

I was truly just trying to have a conversation and understand why a distro might be called "problematic" with no one willing to actually tell me what the problem was. I'm not an OS programmer so I genuinely don't know why AI use on the kernel is fine, but AI use in a distro is to be shunned. Most of the hate I see about Omarchy is based on who is involved rather than a real criticism of underlying technical issues. You are the first to highlight any actual specific problems, thank you

I didn't mean to touch a subject that is so personal and emotional that you feel the need to attack. I really am just trying to learn.

jsbisviewtiful 40h ago on HN
As someone who recently tried installing Linux as the primary OS on an old Macbook... wouldn't recommend it. With all the proprietary parts in Apple products, it's a wing and a prayer situation in hoping the distro has all the drivers figured out. On my 2017 MBP, the drivers for opening/closing the lid and activating/deactivating sleep mode, bluetooth and wifi all had not been fully figured out. Made for a lousy experience and this was the Ubuntu distro for that laptop specifically.

It's also worth saying this, but anytime someone posts a review, or in this case a whole AI written blog, about something, there's a good chance that person is an outlier unless there is significantly more examples. Folks are a lot more prone to complain online than they are to compliment. That this user was so lazy they AI-wrote this blog post also doesn't help their credibility.

mzajc 40h ago on HN
Maybe I'm just exceptionally lucky, but I've used Debian on several "mainstream" laptop brands (HP, Dell, Lenovo, etc.), including newest models, and the worst issue I've run into is that firmware updates require more fiddling than on Windows, so it's ten minutes of work instead of one. Besides that, everything has always worked as expected.
internet101010 40h ago on HN
For Omarchy in particular it depends on the MacBook, as the compatibility varies between both generations of M and base/max.

That said, I have been using it as my daily on my desktop for about a year and threw it on an old 2016 MBP to see what the experience was like, and I will definitely be putting it on my M5 MBP when it becomes stable.

whalesalad 40h ago on HN
I have a Framework 13 pro and really dig it. Running Fedora 45, not Omarchy tho.
toomim 40h ago on HN
No. Linux on Mac doesn't support sleep. Your battery will not be happy.

Fine on a desktop that's always plugged in, tho.

Brass 40h ago on HN
Thanks for the feedback y’all. Expanded my options a bit!
anavat 39h ago on HN
No. I've recently installed Omarchy as a dual boot on an M3 Air and ran it as the primary OS for a week. It mostly works, which by itself is amazing. Bluetooth, camera, trackpad, going to sleep / waking up without issues, battery life is okay. On Apple hardware! There were few glitches but overall it is pretty solid. I could live with it. But. I hate to say it, but Linux is still ugly as hell. With all the eye candy Omarchy adds, with the themes, and beautiful animated backgrounds etc., it still looks and feels awkward and imho it's just not worth it. I am so glad getting back to macOS.
BobBagwill 39h ago on HN
1. Obtain ARM MacBook with as much memory and storage as you can afford.

2. Install https://cua.ai/docs/lume

3. Create MacOS and Linux VMs ad libitum.

4. Profit!

pjs_ 39h ago on HN
I got Framework 13 Pro earlier this year and absolutely love it...

Have run old thinkpads for ~20 years but anyone telling you they run Ubuntu on Thinkpad and have never had to mess about with firmware issues, had battery/standby problems, or had to open it up for repairs is talking shit

g-b-r 39h ago on HN
What in hell would make you think that Omarchy is the way to go for anything?
ahartmetz 39h ago on HN
Omarchy is one of these stupid vanity distros - just use the base distro, Arch.
Aurornis 40h ago on HN
I wish they had posted the short story instead of having AI expand it into this formulaic multi-section prose (Pangram agrees), but the frustrations in this story sound too familiar. Framework is a company whose mission I support and I want to succeed, but I know too many people who have had negative experiences like this.

Making entire computers is hard, and making then upgradeable is even harder. Getting warranty work and customer support right is table stakes for selling a computer, though.

drum55 40h ago on HN
It's annoying that what should have been a human telling a story has got turned into tortured llm prose, it's hard to have any sympathy for the author when it's viewed through the claude-lens.
testtestmetest 40h ago on HN
Reading llm text makes me dizzy, literally in some cases. I dont want to even flip through them.
drum55 40h ago on HN
A business should have trashed it or returned it and moved on, the "support" is specifically designed to waste time and frustrate people into giving up as you found. It's the same at more or less all companies, the consumer facing support is a veneer, it doesn't actually exist. I don't understand why the developer would have been "without a laptop" given it could have been replaced in under an hour, you don't even have to go to a store you can get someone on Uber Eats to pick up a functional laptop, unless this is just stuff a LLM added for flavor. If this was anything more than a brief annoyance I don't understand how you're running a company.
rationalist 40h ago on HN
Exactly: Something breaks within the return window - return it, don't gamble with support.
cybrox 39h ago on HN
You can assume that people that at least somewhat value the sustainability aspect of the product would choose the, well, sustainable approach to repair.

Too bad being wasteful and short-tempered usually works better.

rationalist 39h ago on HN
The manufacturer is probably better equiped to figure out the problem and fix it, than OP is while playing phone/email tag.

Spending hours of OP's time seems more wasteful than shipping two small items to me.

jerlam 40h ago on HN
Yup, and good businesses pay for extended warranties and fast on-site support that normal consumers would never consider, because an employee without a laptop is an unproductive one.
masfuerte 39h ago on HN
I've never understood this. I used to work for a small company, and even there it was cheaper to have a couple of spare PCs than pay for the expensive support, and it got people back to work faster.
bombcar 38h ago on HN
Those support contracts are often designed to be "thrown in" to sweeten a big deal, or let satellite offices manage things easier.

They're often "not worth it" for things like laptops (where in a pinch you can grab one at Walmart) but for servers or other one-offs even small businesses can get value from it.

jckahn 40h ago on HN
I'm perfectly happy with my AMD Framework 13 and would absolutely buy one again. I won't need to for a while though, as I've been able to upgrade mine as necessary over that last two years or so.
rathboma 40h ago on HN
I have an AMD 13. I find the standby battery life to be absolutely terrible, even after confirming I'm hitting fully optimized power draw.

Have you had the same experience?

dapperdrake 39h ago on HN
Depending on what you are going for you may want to add nohz_full,nosmt to your Linux grub kernel command line arguments and set noatime on ext4 filesystems in file /etc/fstab.

Turning off smt (and nohz_full; it’s not a network server) lets the cores clock down cleanly. Got that trick from the intel manual and learned about clock domains from a Verilog programmer. Has worked reliably on many Linux systems.

Even found that one of my i5 servers never had smt to begin with, which explained its more consistent performance.

Had been poking at this for at least 5 years prior with powertop(8) to no avail.

EDIT: nosmt also effectivle doubles ram cache size. For my work the extra hyperthrrad is useless, because there are rarely mixed processes where some to integers and the others do floats. Bottlenecked on ALU and cache, mostly matrix stuff.

mixmastamyk 30h ago on HN
cheschire 40h ago on HN
Scaling is tough. Being a small scrappy company is a lot easier when your customer count matches your employee headcount. Hitting those next couple performance levels though when you scale from hundreds to thousands, then tens of thousands, then hundreds of thousands… those are effectively completely different company structures.
coldpie 40h ago on HN
I've never run a business, but I'm surprised how consistent businesses are in providing absolutely miserable customer support. The customer support team is the face of your business to the people who are directly giving you money. If someone is contacting customer support, then they are already unhappy, and if they are walking away from their customer support experience even more unhappy, then they are going to absolutely hate your business. Employees in customer support should be top-notch and have the power to make things right by the customer at any cost. If your customer support is giving out big piles of money in replacement parts, that's not the support team's fault, that's a fault somewhere else in your company that needs to be fixed.
cbarnes99 40h ago on HN
The reason customer support always sucks is that every company sees it as a place to minimize costs. Outsourcing to the lowest bidder is never going to have good results.
monomania 39h ago on HN
I've heard from industry people that almost nobody factors in customer service to purchasing decisions. Providing it isn't cheap, so you're basically just handicapping yourself in the market.
coldpie 39h ago on HN
> sees it as a place to minimize costs

I think this is the part I don't get. The support team isn't what created the cost, the team that created the problem is. If you want to reduce support cost, you fix the problems that make people contact support, so people don't need to contact support. How big does X need to be for a CEO to approve the statement "You can save $X if you decide to make everyone who has already decided to give you money and has a bad experience absolutely hate your company"?

Quimoniz 39h ago on HN
https://en.wikipedia.org/wiki/Shooting_the_messenger is usually a sports that all companies are good at. Sadly.
Quimoniz 39h ago on HN
Precisely. And then most organisations seem to push the support guys away, moving them to separate departments and whatnot. It's the obvious step for everyone in the company -- afterall, support often brings lots of people bad news about their: flawed design, bad UI, bugs in their programming logic, additional feature-requests to squeeze in.

Consequently developers really like to hole-themselves in, as it's comfortable to spend all day, every day just solving those problems that you imagine in your own mind, instead of actually facing any real problems coming from actual user input....

Thank you for your reasoning.

jerlam 39h ago on HN
For mass-market devices, the margins are so thin that every part of the product has already been cost-minimized, not just customer support. Consumers only care about the initial purchase price, and nothing more.

Aren't many laptops only profitable because they take money from pre-installed antivirus, VPN, and other junk software?

However, Framework should be an exception as they are in their own niche.

thraway3837 40h ago on HN
That's the thing people are not understanding when they poopoo on Apple's products. Unlike any other laptop brand, being able walk into a store, get a laptop and start using it right after getting it while also taking it back if I have any questions or problems is just a wonderful user experience.

I get that Apple's stuff is soldered on or cannot be modified. But honestly, is that really a deal breaker? This stuff has gotten so good that I can't remember the last time anyone opened their computer up to fix or upgrade things. These things have a 8+ year life span and get OS updates for nearly that long too.

I don't know, I guess I just want to get a computer that just works, have it be automatically added to my Apple Care family plan for any damage, and then just get to doing what I need this tool for.

rglullis 39h ago on HN
> is that really a deal breaker?

Yes, to me it is.

> These things have a 8+ year life span and get OS updates for nearly that long too.

And I have desktops with components from 15+ years ago that I could upgrade throughout the years, not at the mercy of a single vendor, without creating a ton of e-waste...

> I want a computer that just works

This is a false dichotomy. We absolutely can have modular and repairable computers that "just works", and we absolutely can have a company that builds them and is better equipped to handle exception customer support.

alain94040 39h ago on HN
The real lesson here is that a company can decide to pay for the cost of providing great support.

Google famously did the math and found that providing human customer support for their product would cost billions and chose instead to fully automate support.

Apple did the same math, and hired tens of thousands of Apple Store employees worldwide, almost doubling the size of the company. Of course, in the end this is a margin/profit trade-off, but be aware that different companies make different choices.

Symbiote 39h ago on HN
Dell and HP etc are better than Apple for business. They will send the support technician to your office the next day (or The save day if you pay extra) and they will fix it.

Apple require sending the laptop away somewhere, and waiting days for it to come back.

pluralmonad 37h ago on HN
I see the appeal, Apple makes nice hardware. There is a subset of computer users whom require that they own their computer, without carve outs or caveats. For those, Apple is a hard sell.
tombert 40h ago on HN
In 2024 I was looking for a laptop to replace my T2 Macbook, and being a pretty geeky dude I was leaning towards Framework. I ultimately ended up getting my Thinkpad P16s just because it was a fair bit cheaper for better hardware, and I absolutely love it.

Looking at this I'm kind of glad that that's the direction I went.

kevinfiol 27h ago on HN
I was in a similar boat, although I went as far as pre-ordering a Framework 13 in 2025. After comparing its specs to a Thinkpad T14 Gen 5 that was both cheaper and more powerful, it just didn't make any sense, even when it came to the benefits of repairability. I canceled the pre-order and have been happy with my T14 ever since.
trentor 40h ago on HN
Same. Horrible experience all over.
ffemac 39h ago on HN
Same here too.
paxy 40h ago on HN
Why waste so much time with support? It should have been clear after week 1 that they aren't interested in helping you.

Consumer protection laws exist for a reason. Collect all the documentation and file a chargeback. This is the only way the problem will actually get escalated.

dchest 40h ago on HN
Consumer protection laws are usually weaker when buying as a business.
echoangle 39h ago on HN
Even the weaker version should allow you to demand a replacement or repair if they send you a faulty product. Is there any country that requires you to do troubleshooting for the seller?
breakwaterlabs 39h ago on HN
A chargeback burns every bridge, and will ultimately get denied if the company provided the good in return for the money. If you start talking about consumer protection laws, the credit company will tell you that this is a matter for civil courts; their "jurisdiction" is just ensuring that charges were authorized and the goods or services were provided.

It is somewhat unfortunate that "chargebacks", like "talk to the manager", have become cheatcodes because their genuine utility has gotten drowned out by a flood of mis/ab-use.

nortlov 38h ago on HN
Sounds like OP doesn't care to maintain the bridge with Framework.

Sure, chargebacks can be abused but what about OP suggests that’s happening here? They spent over three months troubleshooting, exchanged thirty support emails, supplied photos, videos and reproducible diagnostics, tried replacement parts, and sent the laptop to Framework's repair center. They also explicitly asked for replacement parts or a refund back months ago.

breakwaterlabs 38h ago on HN

    chargebacks can be abused but what about OP suggests that’s happening here?
The fact that none of the facts you listed are valid reasons for a chargeback.
yesb 38h ago on HN
A working laptop was paid for and a broken one was delivered. That's a completely valid use of a chargeback. Especially with evidence of being refused a replacement
cestith 38h ago on HN
In some places the consumer protection or fairness in markets laws require that what is sold doesn't just physically exist, but that it arrives to the customer in a suitable state sufficient for the use for which it was sold. It's a crazy idea, I know.
breakwaterlabs 36h ago on HN
This is a matter for consumer affairs, not the credit card company. They have no desire to handle such regulatory arguments; their concern is whether the parties using the credit network are abiding by the network's rules.
joshuat 38h ago on HN
My experience with chargebacks is rather limited, and always through Amex, but when I received a product that did not work as expected/advertised and their support team denied a refund/replacement Amex was more than happy to give me my money back.

I'm sure there is misuse but if the good you receive in return for the money is non-functional, I think a chargeback is the appropriate step if support decides they aren't interested in fixing the problem themselves.

time0ut 36h ago on HN
Credit cards often provide a dispute path for defective goods if you are unable to resolve with the merchant. It might not always work in your favor, but its not a cheat code or a misuse of the process.

See https://www.americanexpress.com/en-us/credit-cards/credit-in...

echoangle 39h ago on HN
Yeah, at least in germany (so I assume it would be similar in france), you just tell them to send you a new one if the one they send you is faulty. It's not your job to troubleshoot their stuff if it doesn't work like it should.
rpdillon 40h ago on HN
I've stayed pretty quiet about this, but as an early and enthusiastic Framework supporter, I cannot recommend them to anyone.

I bought the Framework 13 before launch, and received a machine from the first batch. I later bought their main board upgrade kit and their screen upgrade kit and I did a full upgrade on the machine and rebuilt it. The reason I could justify that was that I would take the old main board and slip it into their Cooler Master case and use it as a spare machine.

But there was a bug in the Intel chip they used in that main board that prevented it from booting properly inside of the Cooler Master case, and going back and forth with support, what they wanted me to do was disassemble my other computers to troubleshoot the one that should have just worked. They didn't offer a replacement. They didn't allow me to send it in to have them fix it. When I explained that I didn't want to disassemble my working machines to fix my broken machine, they stopped replying to me.

This, coupled with the horrendous battery issues in the first version of the Framework 13, led me to conclude another purchase from them would be a big mistake.

Still happy with all six of my System76 purchases.

rationalist 40h ago on HN
> bug in the Intel chip

It sounds like the problem was Intel's and not theirs, yrt they still went out of their way to help you.

rpdillon 40h ago on HN
They didn't go out of their way to help me at all, in fact they did nothing. Engineering teams that choose components are responsible for those choices. Framework neglected to take any responsibility whatsoever.
cromka 40h ago on HN
Idk, it sounds to me that in this particular case you would have same exact experience with every other OEM out there?
spider-mario 40h ago on HN
What other OEM would have you disassemble other machines you own and refuse to do anything if you don’t?
goodmythical 39h ago on HN
"Okay, so, we've established that your dryer's power cable is faulty. All you have to do is replace it with the wire from your stove."
rpdillon 40h ago on HN
If the other OEM had chosen that exact same chipset, and if that other OEM neglected to do anything to fix it, then yes, my experience would be the same.

But, during this period I've been buying computers steadily from System76, and they have been incredibly supportive when I came to them with an issue (to be fair, I've only ever had to work with System76 support once, but it was a very positive experience).

So no, I don't think it's fair to assume that I would have had the same experience with any OEM. Different OEMs could choose different chipsets, and they could choose to be more supportive.

cromka 40h ago on HN
Fair.
derekp7 40h ago on HN
So if framework is exactly like every other OEM out there, what value proposition do they bring?
cromka 40h ago on HN
That's not what I said.
rationalist 40h ago on HN
It worked... in the Framework which is what their engineering team designed it for.

Why would they take responsibilty for thirdparty hardware.

Edit: TIL, thank you to the repliers.

rpdillon 40h ago on HN
They specifically advertised the upgrade kits as an enhancement for your laptop with the ability to reuse the main board in another case that they (Framework) partnered with Cooler Master to create. They even advertised this use case, which I thought was appealing. The problem was it was, to some degree, false advertising.

The Coolermaster case is sold on the Framework website: https://frame.work/products/cooler-master-mainboard-case?v=F...

The key value proposition of the Framework laptop was that it was modular and could be rebuilt as needed with different components so we could maximize reuse. All I'm saying is that when I tried to actually fulfill that promise, I came up empty.

aliher1911 40h ago on HN
Framework sells coolermaster cases to reuse your laptops motherboard after you upgrade your laptop: https://frame.work/gb/en/products/cooler-master-mainboard-ca... I would expect that to work if I would be buying it directly from the mb vendor itself.
LegitShady 40h ago on HN
they didn't buy a chip from intel, they bought a computer from framework, and the support to make sure it works is frameworks, not intel's. framework can deal with intel.

imagine you buy a car and the electronics stop working and the manufacturer says "hey your problem is with bosch, go bug them" - you didn't buy anything from bosch, you bought a car and dealing with defective bosch parts is the manufacturer/dealer's problem, not yours.

rationalist 40h ago on HN
It worked... in the Framework which is what their engineers designed it for.

So your analogy would be: I took the engine out of the car and put it in my bosch, and now it won't work.

ghostpepper 40h ago on HN
The OP bought both the car and the upgraded engine from Framework, who specifically advertised that upgrade path as supported.
drewzero1 39h ago on HN
No, the Cooler Master case is a product sold by Framework and designed exactly for the purpose of housing a Framework motherboard. It's more like if I took the engine out of my car and put it into a rolling shell that the same car company sold me specifically to put my engine into.
echoangle 40h ago on HN
Why would I as a customer care about their supplier? If you buy a car and the motor the car brand bought is faulty, do you ask the car brand or the motor supplier to fix it?
rationalist 40h ago on HN
It wasn't faulty in the Framework. For your anolgy to work, it would be:

Taking the engine out of the car and putting it in a truck and complaining to the car manufacturer that the engine is not compatible with the truck.

eddythompson80 40h ago on HN
Unfortunately for framework though, that’s exactly what they advertise their product to be and shame other products for not being able to do.
rpdillon 40h ago on HN
You're all over this thread making assumptions that are not true. The Cooler Master case is advertised by Framework (they are strategic partners) and they advertised that this specific configuration is supported, and they continue to do so today.

I linked it in my other reply, but you can still buy the case from Framework, right now: https://frame.work/products/cooler-master-mainboard-case?v=F...

rationalist 39h ago on HN
You're leaving out facts that the average person wouldn't know - I don't own a Framework, so I had no idea they made Cooler Master cases.

It still seems odd to me that if this is a common problem and not a random defect, that everyone who bought it should have the same problem and they would get enough feedback to change their compatibility list.

A thought just occured to me: how do you know it's a bug if you didn't bother troubleshooting it with the help from the company?

echoangle 39h ago on HN
> I don't own a Framework, so I had no idea they made Cooler Master cases.

Original comment you replied to:

> The reason I could justify that was that I would take the old main board and slip it into their Cooler Master case and use it as a spare machine.

It says "their Cooler Master case".

rationalist 39h ago on HN
I'll assume OP didn't edit their comment and that I missed the word "their". Sorry :-/
Waterluvian 40h ago on HN
This culture of "it's someone else's problem" needs to die. If you sell someone something, you are responsible for it working as you sold it. Even if behind the scenes you're a customer dealing with Intel failing to fulfil the specs that they sold you.
SamBam 39h ago on HN
> they still went out of their way to help you

Did you... read the rest of the post after "bug in the Intel chip?" It sounds like they did not, in any way, help GP.

rationalist 39h ago on HN
Helping OP troubleshoot (even though OP doesn't want to troubleshoot), seems like they are trying to help.
nkrisc 39h ago on HN
They sold it, it's their problem to fix. Then they can take it up with Intel if they want. That's not on the customer.
dublin 39h ago on HN
I avoid Intel wherever possible now, which thankfully, is almost everywhere now. Their insanely broken power management in Skylake kept Surface Pro 4 users without any ability to sleep and wake (kinda important for laptops!) for TWO YEARS.

Microsoft, to their credit here, really tried their best to patch around Intel's fundamental brokenness, but it literally did take them years to bodge up a solution to make it sort of work like it was supposed to. I only stuck it out becasue I really needed pen and touch capability.

Intel is dead to me now. And in today's AI world, Intel is irrelevant, anyway.

jfsebastian 37h ago on HN
We tend to think like so in the tech industry. Imagine it like this. You drive a car with a faulty ZF gearbox. Would you like to sort things out with the supplier or your local car dealer?
rsyring 40h ago on HN
I did basically the same thing and I've had problems getting the main board to boot reliably. I've not needed it so haven't troubleshooted further. Discouraged it might be a show stopping bug. :(
tripleee 40h ago on HN
Glad I avoided the hype on these and bought a trusty Thinkpad instead. Couldn't be happier.
orzig 39h ago on HN
Just to counter-anecdata, I bought a Thinkpad for use with Ubuntu and it put me through hours of weird bugs. I can't comment on Framework in specific but just a reminder that there are a ton of experiences out there for every widely-used product.
WillAdams 39h ago on HN
Yes, and how the company responds to that is make-or-break.
tempest_ 39h ago on HN
While think-pads usually just work out of the box with most linux stuff (dedicated gpus in laptops being the exception) you really shouldnt choose Ubuntu / Debian for a new machine. Latest hardware benefits a lot from a rolling release distro that has all the latest drivers and fixes. After a year or two ubuntu will likely run fine.

Also I realize how cliche it is to show up on the internet in a linux discussion to you you are holding it wrong aha.

I myself prefer the track point so thinkpads are basically all I have left for that and I know loads and loads of people don't use it so it is basically just branding at this point.

Scramblejams 38h ago on HN
I've had pretty good luck installing Ubuntu, pulling the latest kernel in from their mainline PPA, and installing the latest applicable firmware packages.
kevin_thibedeau 36h ago on HN
It's not hard to build a kernel for Debian systems. The Linux build scripts directly support .deb now.
skrtskrt 38h ago on HN
> Ubuntu

There's your problem

tripleee 37h ago on HN
Did you look up compatibility beforehand?

Ubuntu has their certified hardware list: https://ubuntu.com/certified/search?category=Laptop

The Arch wiki also maintains a list: https://wiki.archlinux.org/title/Category:Laptops

mceachen 36h ago on HN
I hadn't used Red Hat since the aughties, but to support a PhotoStructure user, I installed Fedora on my normally-ubuntu-running laptop (an Acer Swift).

So many things that didn't work under Ubuntu worked perfectly under Fedora. Lid suspend to ram. Webcam. Microphone. WiFi.

TLDR: I'd try booting a live CD with some other distributions before deciding to make do with Ubuntu.

pelagicAustral 39h ago on HN
honestly, for me it's always been between a thinkpad and an xps... I have been tempted by system76 but right now I think they are massively overpriced, so I just don't think I'd go there any time soon...
rationalist 39h ago on HN
I have the new XPS 14, other than the webcam (maybe there is a fix now, I haven't investigated), it has been great with Ubuntu 26.04.

Note: I'm on my second XPS 14 because the first one had a BIOS error within the return period, so I returned it rather than gambling, and bought a second one which has been fine.

alexaholic 39h ago on HN
> tempted by system76 but right now I think they are massively overpriced

Is there a computer that's not overpriced nowadays? With the global chips crisis I think nobody knows how much a computer should cost anymore. The manufacturers are totally taking advantage of it and slapping any price they want, and will continue to do so for as long as they are able to sell.

tripleee 37h ago on HN
If you want to save some money look for refurbished deals. I got a newer model direct from Lenovo off eBay at around 30% MSRP. I wouldn't be able to tell it's not new.
650REDHAIR 39h ago on HN
I will never give Dell another dime.

My XPS 15 had 3 battery failures. 2 Under warranty.

After the 3rd failure I tried to find a third party replacement (because of the Dell track record and the fact that Dell was sold out of the battery at that time...) only to find out Dell has battery DRM and won't charge non-OEM batteries. Basically the machine would boot and stay on until the initial charge died- super cool.

My MacBooks and ThinkPads are workhorses... If given a Dell I would sell it to fund a used ThinkPad.

close04 38h ago on HN
I’m a long time user of IBM and then Lenovo laptops going back decades. Just wait until you find out how Lenovo machines have a WiFi card whitelist so you can’t install whatever model you want. Or that on AMD machines they use PSB which locks the CPU to a Lenovo board, and if you don’t disable it and install a new CPU you are one Enter key away from locking the new one too, after they present you with a misleading “want to secure your CPU” message. And these are just the issues that are the result of conscious hostile decisions. Apple has the same problems with user hostile decisions and 0 repairability.

You also have less intentional issues. A lot of their X1 line generations were terrible, problematic screens, poor cooling, battery issues, BIOS issues, etc. Not just on 1 or 2 devices, but problems that I could see on batches of thousands or more. Apple devices were for years infamous for screen, GPU, keyboard issues, cooling issues (the last Intel models were something special, to put the last IBM models to shame) and so on.

Nobody collects full reliability statistics on the big manufacturers because the data isn’t available so you have to hope that when you buy from a line of laptops you didn’t land on the problematic one.

In the past few years I had better luck with Dell than Lenovo (again, talking large scale, for my use I stuck with some older Lenovo models).

I’m a bit soured with Lenovo ATM after buying a desktop to scavenge the PRO line APU (for the ECC support), wondering for a hot second why it’s so much cheaper than an identical HP, only to find out the CPU can’t be used on any non Lenovo system. Bought another equivalent HP which runs cooler and consistently moderately faster.

FireBeyond 36h ago on HN
Sure, but I've been fucked by Apple too.

I had a MBP with the screen delamination issue - Apple didn't care, called it cosmetic, until after I'd got rid of it and decided it was an issue.

I had a MBP that had the mainboard issue - I could reliably and repeatedly make a fresh OS install kernel crash on apple.com in Safari, in front of the Genius, but because it passed their diagnostic tool, sucks to be me.

Butterfly keyboard issues.

An MBA that had a charging circuit issue with small water ingress on the magsafe port? Laptop works fine, Apple and third party battery diagnostics report battery healthy, just can't be charged. Go to Apple, expecting something reasonable? $300, maybe, after time and materials?

"We have a quote for you, it will be $950..." (to repair a $999 laptop!) "Perhaps we should get you looking at a new Mac instead..."

binsquare 39h ago on HN
I have both thinkpad t480 and framework 13 - very happy customer of both.

I think there's always extremes to stories like these and I've definitely had my share with thinkpad from dead pixels to month long support correspondences.

binsquare 39h ago on HN
disclaimer: this is not to say it doesn't suck when it happens.

author's frustrations are completely valid and i do hope framework improves

ffemac 39h ago on HN
Second this. (I own Thinkpads and Framework hardware so this is based on actual experience)
xorcist 39h ago on HN
Laptops peaked with the Thinkpad X60.
wuschel 39h ago on HN
The X20x line was also great, although the screen area / chassis area was optimal with the X6x.

Still have my “bento box” and fire it occasionally if I need legacy software that neees to run on a malware-eque OS (read: Windows 10-ish and later)

stackghost 38h ago on HN
I have a modded T60 with an i7 and 16G of memory in the original case. It’s glorious.
bsoles 38h ago on HN
My experience is also consistent with this. I never had a ThinkPad where I couldn't run Ubuntu on. But my needs were pretty vanilla: no GPU, etc.
notnullorvoid 38h ago on HN
I hope you never have to deal with Lenovo support. If you do it's worth paying extra to have a technician come to you, Lenovo's mail-in support centres have terrible quality control.
wildzzz 36h ago on HN
That's why I buy used thinkpads. Once you get past the infant mortality, they last a long time. Plus, you get the benefit of a decent piece of hardware for like 80% off.
notnullorvoid 35h ago on HN
Where do you buy them used that you can be sure there are no issues? In my experience the issues are more subtle than "does it boot" which seems to be all Lenovo's quality control checks.
wildzzz 15h ago on HN
Ebay. If the seller includes a photo of the BIOS setup screen, that's good enough for me. I'm not buying souped up mobile workstations, the most intensive thing they run is chrome and some 20 year old games.
tripleee 11h ago on HN
Lenovo sells refurbished Thinkpads on eBay for really good prices. Got mine effectively brand new at ~30% MSRP
gvurrdon 38h ago on HN
All but one of the ones I've had have been great. The one that wasn't was a Z16 Gen 1, which had problems with overheating.
hungryhobbit 37h ago on HN
You sweet summer child. I was happy with my Thinkpad too ... once.

Then I tried to close the laptop, and my thumb touched the screen. NOT hard, very gently, but somehow it was enough to puncture the screen, and it stopped working shortly thereafter.

This seemed like an obvious defect: I have used laptops for decades, closed them literally thousands of times, and never punctured the screen in the process. Lenovo refused to fix it.

I went to a 3rd party (U Break It We Fix It or something like that), which was a separate nightmare, but after a month they gave up.

So I paid for a Lenovo warranty, even though I'd have to wait like two months before I could send the laptop in. After two months I finally did and EVEN WITH A WARRANTY LENOVO REFUSED TO FIX IT. They literally wanted to charge me about 90% of the original purchase price, with the warranty.

So, I guess they have multiple warranty levels, and I picked the wrong one but FUCK LENOVO for selling me a defective screen that broke the moment the lightest pressure was appleid and then refusing to fix it.

onefiftymike 37h ago on HN
I bought a used gen 1 T14 and it just worked with Xubuntu out of the box. Of course I came from a 13 year old HP, so almost anything was an upgrade...
cogman10 39h ago on HN
Here's my perspective because I recently became a framework owner of the 13 pro. Before then I'd bought a Dell XPS that came to me broken out of the box (keyboard was completely fubar).

The 13 pro has been a very good machine for me. Excellent battery life, good performance, just smooth sailing. My one criticism is the speakers are crap. I know they improved them, so I have to imagine the original 13 speakers were even worse.

The reason I grabbed the 13 pro was because framework featured an upgrade path from the original 13 to a 13 pro by swapping out relevant parts. That's what sold me.

cge 39h ago on HN
>The reason I grabbed the 13 pro was because framework featured an upgrade path from the original 13 to a 13 pro by swapping out relevant parts. That's what sold me.

Note that the advertised upgrade path is not available yet, and won't be available any time soon: there's a reasonable guarantee that no upgrade parts will be available for purchase until at least February 2027, and quite possibly long after that.

throwaway240403 38h ago on HN
Not particularly fair to blame framework for the global supply shortage. You can perhaps complain that they're prioritizing new laptops over upgrades, but I'd argue that's a defensable business decision under current market conditions.
justin66 38h ago on HN
Supplying parts is a pretty major part of their schtick, so yes, let's please hold them accountable.
croes 37h ago on HN
Accountable for AI companies buying up the market?

Hardly their fault

cge 36h ago on HN
AI companies bought up components for laptop battery, speaker, and chassis, touchpad, etc?

The mainboard/ram/storage that would be most impacted by AI companies isn’t the problem here: in fact, Framework does let you order those now through the same batching process as the full laptops. What you can’t do is upgrade your current mainboard to the pro chassis, even if your current mainboard is their latest amd one and the full pro could be purchased with the same mainboard.

croes 26h ago on HN
Datacenters need backup batteries that use the same resources as Laptop batteries.

Other components cam simply be out of stock because manufacturers shift their production to components in demand for AI.

Why building PC chassis if there is a high demand for server chassis for datacenters

ekianjo 32h ago on HN
batteries are out of stock because oF AI?
croes 26h ago on HN
What are the backup batteries of datacenter‘s made of?
varkokonyi 18h ago on HN
I would bet they use lead acid batteries and not lithium-based ones. Also they probably don't have HUGE capacities, as they rely on diesel generators for actual emergency power
spatular 36h ago on HN
They are also routinely out-of-stock on li-ion batteries. I had to replace bulged batteries 2 times, every time had to wait for like 1-2 months for them to become available. I had easier time buying original battery for 6 year old dell laptop.
mkozlows 38h ago on HN
I mean, yes, but that's because they're still fulfilling preorders! You literally can't buy a 13 Pro off the shelf, either. I think you can make the case that they should do parts-based preorders alongside full-system preorders, but I understand the logistics for why that's awkward.
cge 36h ago on HN
If I recall correctly, they have done upgrade-kit preorders and batches in the past, and it could have made sense here, in that 90% of people wanting to upgrade probably want the same thing (the pro chassis and associated parts, without the mainboard/ram/wifi/storage).

Given all the bring-your-own options they currently have, they could have even just added a bring-your-own option for the mainboard.

lowbloodsugar 38h ago on HN
I swear Dell have two factories. In one factory they build their regular laptops. These are shit. In the other factory, thats where they build you a laptop if you spent the addition $600 on the 5 year, next-day, on-site service.
entropie 38h ago on HN
> My one criticism is the speakers are crap.

Ive read you can tune something around DSP with software. Here is a random reddit thread about it: https://old.reddit.com/r/framework/comments/18cngrn/improvin...

agildehaus 38h ago on HN
The speakers aren't Macbook Pro level, but they're not crap. Linux (and maybe Windows, I don't know) just has no good tuning for them.

I have a PipeWire/WirePlumber DSP I'm thinking of publishing. Others have made EasyEffects profiles.

dv_dt 37h ago on HN
I have a desktop with a monitor with crap monitor speakers and was floored with the improvement when I applied easy effects and played with the tuning. Not amazing, but it went from don't even bother turning on the sound, to ok for podcasts and background music
dsego 36h ago on HN
On windows there is FxSound. The difference is night and day.
throwuxiytayq 35h ago on HN
I’d have never believed you can salvage these speakers with a software profile until I tried it - and yeah, they’re really surprisingly workable with a FW13-tuned EasyEffects profile I grabbed from online. It’s the first thing I’d recommend anyone to set up on a fresh OS install.

Is a PipeWire DSP lighter than EasyEffects? I’d be definitely interested in that, EE sounds great but it feels like it’s not as optimized as possible.

gavinsyancey 39h ago on HN
> there was a bug in the Intel chip they used in that main board that prevented it from booting properly inside of the Cooler Master case

How do you know that? Is this a known issue you ran in to? Or did it stop working after you swapped it out and then you refused to troubleshoot?

rpdillon 39h ago on HN
I spent about 15 hours troubleshooting this problem. What I refused to do was disassemble another working computer so that I could troubleshoot the broken one.

The bug is in the handling of power cycling RTC battery. Basically, if you leave the main board unplugged for weeks and then try to power it up, it'll refuse to boot, and there is a complex set of LED diagnostic codes that they had asked me to take a video of and send to them, which I did. They had asked me to pull the real-time clock batteries out of other machines and insert them into the main board as part of the troubleshooting and I said I didn't want to do that.

You can read more about the issue here: https://www.reddit.com/r/framework/comments/vdo3i6/buyer_bew...

renehsz 39h ago on HN
> Still happy with all six of my System76 purchases.

I, on the other hand, wish I'd gone with a Framework instead of System76.

My System76 devices keep breaking and because they're a few years old already, obtaining replacement parts is a challenge. And forget about upgrading them or giving a laptop a second life as a desktop.

justin66 38h ago on HN
There are other options.
rightnutwingjob 38h ago on HN
Big corporations upgrade their computer fleets on a regular cadence.

Their old machines can be picked up from the referb shops for from as little as 10% to 20% off their original retail price.

Over the years I’ve had multiple Dell and HP laptops and mini-desktop machines that have been in excellent condition when I got them, and each lasted me years.

usefulcat 37h ago on HN
I assume you meant “10% to 20% of”? Because 10-20% off seems like a pretty poor discount even for 1-2 year old hardware.
rightnutwingjob 25h ago on HN
Correct, yes, my mistake.
jfsebastian 37h ago on HN
A friend of mine and I used to swear by old Lenovo devices. Back then, those things were absolute tanks. He even took them with him to Afghanistan—not even sand or dust could harm them. All that needed replacing after the trip were some parts of the cooling fans and the keyboard.
silisili 37h ago on HN
The old squared off T series were absolutely bulletproof. I, a person well over 200 lbs, stepped directly on it(on accident) while closed and it didn't hurt a thing. I don't even remember it making a noise. Any other laptop would have surely broke the screen, if not split the case. Reminds me of the old Nokia phone build quality.

That said, this was more than 15 years ago, I have no idea if they still make them similarly.

alexjplant 36h ago on HN
I was spinning my T14s on my finger in the hallway yesterday while waiting for the elevator and dropped it on the floor. Other than the bezel popping off of the screen in the corner it was unfazed (and it popped back into place perfectly). My X60 similarly survived a trip down concrete steps on my porch in college. Thinkpads running *nix are the jam.
hermitdev 36h ago on HN
Decades ago, I bought a used Dell workstation case & motherboard. Motherboard was for dual socket P4 Xeons with AGP graphics (one of the few motherboard configurations like that around at the time that was SMP and had AGP). Unfortunately, unbeknownst to me, the removeable voltage regulators had to be identical (it's been over 20 years, forgive me if I forget the exact part name). The ones I'd gotten my hands on weren't. I spent hours on the phone with Dell support. They were happy to help, even though I didn't spend a dime with them on that PC. I had bought other Dell PCs before and later bought an LCD TV from them. I wouldn't recommend buying a PC from them because of their propensity for using proprietary parts with their cases and connectors making upgrades a pain, but their support was always good in my experience.

The PC I took to college before that was a Dell, too. I had issues with my monitor...repeatedly. Each time it went, they overnighted a replacement to me under warranty, no charge to me at all.

It's been a while; I hope for their sake their support has stayed at that level...

jmux 38h ago on HN
While it is nice that we have more options than in the past for portable linux poweruser laptops nowadays, i do still wish they were better

Framework (i personally love mine, but I haven't had to deal with support yet) Lenovo (I have an X1C for work; it's a great machine, but very expensive, not repairable, and I had significant issues up to 6 months after the model I had was released with the wireless drivers on LTS) System76 (expensive, feels subpar) Dell (lolno never again)

I wish apple provided official support for asahi, but I don't see that happening anytime soon.

justin66 37h ago on HN
> I wish apple provided official support for asahi, but I don't see that happening anytime soon.

Even some level of unofficial support might be a game changer. It doesn't seem crazy, except in the cultural sense: modern Apple views their stuff as the supreme ultimate and for them, interoperating with inferior technologies is kept to a minimum. They don't even understand the concept.

Financially, it could be a win for them in a way that the support for running MacOS on clone hardware never was back in the day.

anonymous_user9 36h ago on HN
TBF, they already do offer some unofficial support. They could've made the M-series macs just as locked down as their mobile devices, but they went to the trouble to make it possible to cleanly install custom OSs.
RunSet 36h ago on HN
I would rather Apple explicitly forbid Linux on their hardware and aggressively prosecute everyone who attempts it, to avoid the only way to run Linux on Apple Silicon walking on eggshells out of fear that Apple might withdraw its unspoken permission to hack.

https://asahilinux.org/docs/platform/security/#apples-unspok...

acomjean 37h ago on HN
I’ve had good luck with mine. I had a fan issue but because they’re oem manufactured system76 gave me a part # and I replaced with one purchased off the internet.

Not the best built machines but certainly good enough (my 2015 Mac book being my gold standard)

JuniperMesos 36h ago on HN
I did in fact buy a system 76 laptop, which I then returned because its battery life was atrocious. I had a much better experience with the framework 13.
persolb 34h ago on HN
I always think these types of threads are the result of the opposite of the survivor bias. People that ran into problems and people that love it tend to be the only commenters; and it’s easier for an OK product to get haters due to defects than lovers due to being OK. Anyone who had an ‘ok’ time with a product surviving well isn’t impelled to comment.

Thus, it’s really hard to tell how big of a quality problem a product has; versus an acceptable low level of bad luck with specific product/service/staff.

arcwhite 33h ago on HN
I'm one of these! I bought a framework 13 and it has been a perfectly cromulent laptop. It did the things I wanted and hasn't (knock on wood) caused me any grief.
kelnos 30h ago on HN
If you bring up two competing products, there will always be several people who had a great experience with one and a terrible experience with the other, and vice versa. The same goes for customer support; CS reps are human and have bad days and good days, and a company with generally excellent support will still give people bad experiences sometimes.

In isolation, these sorts of reports are useless. Every product has problems, no product is perfect, no QA process weeds out every single defective unit before it goes out to a customer, and no company has perfect customer support reps who will always do the perfect thing, every time.

Sure, aggregate statistics about support issue count, severity, and how the company deals with those reports are useful and important, but one-off comments in a place like this just don't tell us much.

mixmastamyk 39h ago on HN
Not an excuse for them, but you bought the very first product from a brand new company. They'd probably do better today.

For example, I bought the second and fourth(?) laptop they put out and am very happy with them. One issue was there was a problem with the power cable jacket opening up. Suppose support could be a bit faster but they sent a new one after I mailed a photo in.

Let it be a warning to everyone else, early product/early company, expect adventures. You're going to have to help them out, even to make them do the right thing. Believe they're capable of learning however, and don't think this "never again" rhetoric is helpful in that case.

stronglikedan 38h ago on HN
Nah, too much competition to not get it right the first time. Being ghosted by support is especially egregious from a company at any age. Life's too short to care about whether they've fixed their shit.

(And if they ghosted OP for a good reason, then they've only lost one customer, and it was intentional.)

mixmastamyk 38h ago on HN
The point being, if you're that mercurial, you should not be buying new products/company at all. Either you welcome risk or are risk-averse, not both.
zdragnar 38h ago on HN
Fantastic support can cover up a lot of sins. Brand loyalty isn't everything, but it is one of the reasons Apple stays relevant.
jfsebastian 37h ago on HN
… or your preferred retailer. This story about Amazon just never gets old. Back in 2010—I believe it was—I ordered a 27-inch iMac. Over time, dust accumulated inside the display, so 18 months after buying, I filed a claim with Amazon. To my complete surprise, they sent me a shipping label, and just three days later, I had received a full refund of the purchase price.
NBJack 38h ago on HN
Hey, shit breaks on first batches. Early adopter risk, no doubt.

But the data points for ongoing shitty support make future purchases a real gamble. Based on the article, it sounds like they haven't learned at all.

jethro_tell 37h ago on HN
I’ve had that same support experience with dell and hp over the years. I’ve also had great support from both.

The only place I’ve ever had real consistent support has been apple. Unfortunately I don’t love their products, so it’s kinda a rock and a hard place.

My framework has been great, and I’ve gotten a couple for my kids, but this story is a real bummer to hear.

If you’re small and trying to compete against a behemoth, decent support is one of your best options. Because hardware is pretty much a commodity.

NBJack 31h ago on HN
> If you’re small and trying to compete against a behemoth, decent support is one of your best options.

I really agree with that. Support is one of the key places where you have an opportunity to turn unhappy customers into lifelong customers.

jethro_tell 29h ago on HN
Especially if you're working in commodities. If you're selling something no one else can make yet, yeah, they'll buy in spite of your service. If you're selling something a lot of people can sell, you might benefit from good support and return and referral business.
caycep 39h ago on HN
which System76 laptops do most people get? would it be the Ryzen (Pangolin or Oryx) ones?
cevn 37h ago on HN
I had the original Pangolin. It had some significant issues w/ charging and trackpad but that's not stopping me from getting a new Pangolin..
caycep 35h ago on HN
ah, good to know. I had a disappointing experience w/ linux and the AMD mobile APU in a Lenovo T16 (7545U I believe); the amdgpu driver would always freeze up and crash on gnome/KDE tasks on waking from sleep; spent some time trying different configurations of Debian and fedora to no avail; I assume the support would be better w/ a dedicated system from System76
Nav_Panel 38h ago on HN
What the heck... I think I had the same issue as you a few months ago, 11th gen board, very early but maybe not pre-launch, and swapping in a $10 battery off Digikey fixed the "I need my AC adapter for it to boot at all" permanently.

And then I just yesterday did the Cooler Master swap, new mainboard into the laptop chassis, old mainboard as a server, and it went without a hitch, both machines running just fine.

I also don't know the battery issues you're referring to, I don't remember dealing with anything super horrendous in the 5 years I've been using this laptop, but my battery is currently in good shape, probably 6-8 hours on a full charge, which is impressive for a 5yo battery.

rpdillon 38h ago on HN
Part of my troubleshooting was buying a new battery so that I could swap it in, and I didn't have any luck with that direction, which is why I ended up contacting support.

The battery issues I'm referring to are that when I put the laptop into standby, it'll go from 100 to 0 in about 15 hours. I don't think it's that interesting of a bug since so many people have been discussing this for so long, but I did note that the Framework 13 suffered from that as well.

beAbU 38h ago on HN
Is this running windows or linux?

Modern Intel hardware has an active standby on windows that it goes into when you close the lid with the charger connected. If you unplug the charger first, and then put it to sleep then it lasts way longer.

This is not a Framework specific issue though, at some point dell had a service advisory out for some of their machines, to not let it suspend with the lid closed, as it will cook the screen! My 10th/11th gen Intel HP would be warm to the touch while it's on standby.

rpdillon 37h ago on HN
Yep, I run Linux across everything, and you're correct that this is not isolated to just the Framework. It just ended up biting me harder with that particular laptop than any of my others.
beAbU 37h ago on HN
Fwiw my T480 running linux has abysmal battery life when suspended. Almost as bad as when it's actually on!

I've given up on proper sleep unless it's a mac. These days I just save and close everything, and shut the machine down.

umvi 38h ago on HN
S76 is awesome if you use Linux as primary OS. Stay away if you need Windows.
jambutters 38h ago on HN
is windows support that bad? i was under the impression it'd work fine on windows as well
umvi 38h ago on HN
Maybe it's better under Windows 11, I'm not sure. I put Windows 10 on mine (galp5) in 2024 and it was a terrible experience - sleep didn't work when closing the lid, would die on startup if not plugged into wall power (though after boot, I could remove) being the two most annoying. I wiped W10 and put Debian on it and then everything worked great (sleep on lid close, boot on battery, etc)
sitzkrieg 38h ago on HN
i use win 10 ltsc on a 2017 gazelle. zero issues
zzzeek 38h ago on HN
Yeah I had the battery problem, had to get a new battery because the first one blew up like a pop tart and I now permanently keep the laptop at 60% charge tops. Are you saying my first cooked battery was not actually my fault ?
notdefio 38h ago on HN
Your mainboard fit in the Coolermaster case? Mine had a defect where the case's pegs were too large for the mainboard to fit over them. Framework sent a replacement, same issue. Framework sent a second replacement which they claimed was "white glove service", meaning they would have someone verify the quality of the part before shipping it. Same issue. I returned them all for a refund. Several others on the forum had the same issue.

I also went through 3 hinges on my 1st gen Framework 13 laptop, because the hinges were so weak they couldn't hold up the screen under its own weight.

My thread cataloguing my issues with the Framework 13 got so long, the moderators closed it.

My trackpad stopped detecting clicks. So did the replacement that I bought because it was out of warranty.

One of the buttons for the expansion card removal fell off. Framework replaced that under warranty.

The speakers would cause the keyboard to rattle until I took off the shift keys and adjusted the stabilizers.

I really wanted to believe in and support Framework. I support their mission. But man, everything I've gotten from them has been junk.

justin66 38h ago on HN
> going back and forth with support, what they wanted me to do was disassemble my other computers to troubleshoot the one that should have just worked. They didn't offer a replacement. They didn't allow me to send it in to have them fix it. When I explained that I didn't want to disassemble my working machines to fix my broken machine, they stopped replying to me.

That completely tracks. I've found their support to be extremely lame at best.

You can literally see exactly what I bought and when I bought it but you still need me to crack open the case to get the serial number on the mainboard whose widespread, notorious defect you aren't going to repair, but instead offer a lame workaround part for me to install myself instead?

You need a recorded video of the lid of my laptop gradually sagging downward while I type before you can send replacement hinges under warranty, even though the defect is common and why the fuck would I want to scam you out of little fucking hinges that I need to install myself anyway ytvutyf023f498020923r8

Yeah.

mindcrime 38h ago on HN
> Still happy with all six of my System76 purchases.

Conversely, I'm a bit iffy on System 76. The main reason being, the build quality of the physical device. From a pure computing viewpoint it's fine. Maybe better than fine. But the case is really falling apart. Lots of cracks, and broken fan slats, and such-like. I mean, it still works and is usable, but it just doesn't feel like a high-quality build, so I'm not sure I'd buy from them again.

cevn 37h ago on HN
I'm on the boat for a second System76 pangolin now. My first one had a few faults but was the best laptop I owned.
YegoBear 37h ago on HN
I never understood this company. Comparable ThinkPads (at least until the rampocalypse) cost less and are pretty repairable/durable. Mac hardware knock on wood has never given out on me either. I remember seeing the YouTube reviews of the Framework 16 laptop, whichever one had the GPU, and you could tell they were really flimsy and had tons of chassis flex, but were being given a pass.
warkdarrior 35h ago on HN
What's not to like? Higher price, lower quality, and poor customer support. Choose three!
opan 21h ago on HN
ThinkPads had a few gens where the RAM was partially or fully soldered even in the T series, I think this overlapped with Framework entering the scene. If you get a 2024 or newer T series ThinkPad, you should be golden, just be careful of the 2019-2023 era, also avoid the s suffix models. If you happened to get a T480 when it was new and only just recently thought about replacing it, you may have missed the whole soldered RAM era.
mkozlows 37h ago on HN
I think the tbf on this is that the very first 11th gen product was buggy in a way that later ones haven't been. My 12th gen has been error-free; my 13th gen was good until the motherboard died (which is a longevity problem, not that kind of bugginess); and my Pro is great so far.

Fully agree with you about the awfulness of the support, but I think the picture you paint of their hardware is too negative based on you having gotten the bad one.

lousken 36h ago on HN
What exactly do you expect from the first batch of first generation? Do you also own the first system76 product?
dtj1123 40h ago on HN
Eh. I'm still buying one.
elteto 40h ago on HN
That’s why I don’t bother with going through support channels if I’m within the refund period. Either send me a new one after the first email or give me a refund. Or if I really want _that_ thing I will skip support and buy an identical new unit while I initiate the return, to get the replacement ASAP. If the manufacturer gets cute or refuses a refund the it goes straight to a chargeback on my credit card, no back and forth.
SV_BubbleTime 40h ago on HN
Let’s see…

On a 16 I thought for an employee, he had two full ssd corruptions. FW sent new SSDs, but they didn’t really care to diagnose the issue. Turned out to be a bad motherboard only after I refused to accept a third ssd.

On my 13, the battery dies in shutdown, constantly. Linux OS, if I don’t shutdown completely it’s dead in a day. If I shutdown completely it’s dead in three days. I have a surface pro 3 and 5 with OLD batteries that last months in shutdown.

Other units have had bad trackpads, keyboards, webcam, randomness like the keyboard light going in and out, and I had a screen die just outside of warranty.

YES, all these issues would be fixable with just one tool. The economics of replacement parts is wildly different when I look back to how much I’ve had to spend on the four frameworks we have vs the thousand non-frameworks we’ve gone through.

I want to like them.

perks_12 40h ago on HN
I have a Framwork 13 (with the 11th gen Intel). I don't hate it, but I wouldn't recommend it either.

Battery life is abysmal. That is even after the battery upgrade kit was installed.

Recently I swapped the bezel, which was easy, and hey, you can do it. But I never had the wish to replace it with literally any other laptop I ever owned. But on the framework, the plastic bezels somehow disintegrated, and I basically had loose strings of it hanging around.

cromka 40h ago on HN
But that's any hardware with old Intel CPU. I don't see how Framework is at fault here.
monomania 39h ago on HN
Ehh. I've got several Frameworks, including the F13P. None of them have great battery life. FWIW, they're all AMD machines.
cromka 34h ago on HN
But again, this was common across the board until latest Intel generation, which is the first one that can compare with Arm chips.
throwaway2037 38h ago on HN

    > That is even after the battery upgrade kit was installed.
Can you tell me what changed between the old and new battery?
artemonster 40h ago on HN
the dream of open repairable hardware is dead
vvpan 40h ago on HN
Why do you say that?
benjiro29 39h ago on HN
I think the issue is simple that most people do not care. They rather buy a laptop from Apple, Dell ... run it into the ground, and then just buy a new one with a better screen and other improvements.

This results in Framework and companies like that, being more bespoke. So they do not have the volume of scale. When its a one man or small team, your support tends to be great because your talking directly to the core.

When a company like Framework grows a bit, the amount of issue tend to grow also. So they are required to get a lot of staff and the core (hardware and support) itself gets water down somewhere (often support). Aka cutting costs on those expensive humans...

Its actually hard for companies to jump past that, where they get the production volume to force cheaper prices from supplies (on the hardware side), to compensate for the increase human factor.

You notice over the years, with a lot of companies this trend. Where if they are small, great. You brag about them, their customer base grows thanks to the good word to mouth, and after a while you start to notice new names, less well informed, more bugs and issues. What used to be a great personal experience is now replaced with the venire of a large corporate structure, but not the same level of flexibility to get personal accountant managers, etc.

There is this gap that Framework falls under. And they are having a hard time passing this, with the known results. Also the entire hardware market going crazy really does not help given that they are already producing bespoke / more expensive items. They have the drag of a large company but not the advantages of a large company. And getting past this hurdle is often the difference between a Steve Jobs and ... some name you never heard from. Yea, not the best examples but that is the first name that comes to mind lol

uludag 40h ago on HN
Looking at reviews of Framework laptops it seems the dream is indeed there, but it comes with tradeoffs and a pricetag.
fhn 31h ago on HN
Framework publishes official mainboard interface schematics and hardware documentation on GitHub and iFixit for repair and customization
maeln 40h ago on HN
I love my Framework 13 to death to the point that I cannot see myself buying any other laptop, but I gotta say, Framework really have to up their QA and customer service game. We also decided to use Framework laptop at work, and we had several with issues. Mine has a broken webcam module and came with a whiny high pitch CPU fan. I did not care for the webcam (hey, can't hack something that doesn't work), but the CPU fan was incredibly annoying. I had to do several rounds of email with Framework support before they send me the replacement part. And we are based in E.U so we have the automatic 2-year guarantee. Idk if it would have been possible outside of the E.U.

I really love the module system, the screen ratio, the linux support, the 180° hinge. But I think it is fair that the frequent QA problem is a dealbreaker for a lot of people (especially at the price point that they ask). For me, as long as they don't fix this, it will mean that Framework stays a niche manufacturer for enthusiast.

nrp 38h ago on HN
Could you share your order number or support ticket number? I want to use these to walk through with the team to determine how we can do better.
lnxg33k1 35h ago on HN
I think given the number of people frustrated with the company you could open any ticket if you wish to learn how to do better
taegee 22h ago on HN
This is not helpful in any way.

If that were the case, we either wouldn't be talking about it here (we're talking here only because framework _is_ widely popular), or he would have already done it (if "opening any ticket" would help).

prism56 36h ago on HN
I have had a FW13 for 3 years now. I love it. I love the repairability and upgradeability but I've had 3 issues which were easily fixed, the customer service sent out parts for free for 1 and I bought a replacement for the other. The other required a slight reseating of the keyboard membrane.

All 3 issues were easily fixed with replacement parts that other laptops couldn't get.

However. My old laptop was 5 years old and never had a single issue that needed any fixing...

roter 18h ago on HN
I've bought 2 x Framework 13s and 2 x Framework 16s because I do like the repair-ability.

It has been years and I'm hopeful that it has changed, but I had an extended back-and-forth on a fan that was whining. It was taking forever, involving photos(!?). In the end, I just ordered another fan as I got sick of dealing with their support.

ragall 40h ago on HN
Too bad it's completely LLM-written.
reshux 40h ago on HN
I got a Framework 13 in 2021. I was so excited to use it. I had to repair it multiple times, first when it was 2 years old, second time when it was 4 years old. I know the point of having a Framework is repairability and upgrades, but I never had to repair a laptop before, especially during the first 5 years.

I first had to use it as a professional dev device in late 2025, before that it was just a light personal laptop for me. It suuuuucked as a dev device for me. I got a Macbook Pro again.

Their customer support experience is slow and really infuriating, even for design faults they admitted and for things they offer free replacements.

vvpan 40h ago on HN
It is hard to be a small manufacturer, especially with the lofty goals of Framework, let's keep that in mind before throwing too much dirt.
dclaw 39h ago on HN
No.

If they have 10 different "people" to handle a single ticket and act like it's new every time, they have the staffing to handle a ticket like this. Anyone justifying a support person's refusal to read ticket history is part of the problem.

orblivion 40h ago on HN
Okay so which one is the good company then? Seems like every option sucks for one reason or another.
opan 20h ago on HN
You gotta go model by model and read reviews. No such thing as a good company.
orblivion 14h ago on HN
Okay. Well, at least customer service is company by company. Sounds like that's part of the problem here.
scotth 40h ago on HN
Just want to put it out there that I don't feel this way, and I will be buying Framework again. I like it quite a bit.
jon128 40h ago on HN
Framework's repair center ran complete diagnostics, tested two keyboards, and found that those two keyboards were working perfectly.

All these guys had to do was order a new keyboard. If they demanded a refund for the not-working keyboard they'd get one. I know, from experience having handled dozens of Framework laptops, Framework absolutely will do this.

You'd think someone offering consulting services would be a bit sharper..

The criticisms of the ticket ownership posture are helpful (depending on how accurate they actually are), I have forwarded this along to someone high up in Framework's support branch of its org chart I have a good connection with.

cbarnes99 39h ago on HN
"found that those two keyboards were working perfectly" Except for the fact that they obviously weren't. You shouldn't have to pay for the replacement part out of pocket, that's literally the entire point of a warranty. I work leading a warranty repair team for one of the largest OEM PC manufacturers, if a customer complains about a keyboard issue that we can't reproduce, we replace the keyboard anyway. Keeping your customers happy is always more valuable than the cost of the replacement part.
jon128 39h ago on HN
If the technicians in the Framework support center say the two keyboards they tested were working perfectly, they obviously were working perfectly.

The other keyboard, the one the customer already had, was the one that was obviously not working perfectly.

_

> if a customer complains about a keyboard issue that we can't reproduce, we replace the keyboard anyway.

The obvious thing to do. Not doing this is the mistake Framework made.

_

> shouldn't have to pay for the replacement part out of pocket, that's literally the entire point of a warranty.

An in ideal world, no one should have to do anything.

From a logistical standpoint, competent people know how to make results happen. As someone operating in a business I would order a new keyboard.

Could just send the entire laptop back.

_

What I can say for sure, when I have had to make sure that developers and other users are operational, not a single person went with more than a day of downtime just because one (or even two or three) laptops had issues.

Framework is awesome. I am personally responsible for more than one dozen of Frameworks being deployed and will probably be responsible for many more.

phendrenad2 39h ago on HN
> If the technicians in the Framework support center say the two keyboards they tested were working perfectly, they obviously were working perfectly.

Ah no, that is not "obvious". It's entirely possible that they put the keyboards into a test harness that didn't actually test the things that were reported broken (module appearing as a numpad, c key inserting a backspace), and the technicians were not trained or allowed to go outside the testing parameters.

zackify 40h ago on HN
If anyone is interested, I had a recent framework 13 pro and a mainboard issue.

They did offer replacement after about 4 emails.

I am a bit surprised a fault this bad couldn’t be caught during QA. But they’re also a small company and I’m just waiting now for my replacement to come. May be more on intel’s side too than them.

More details on my issue here https://community.frame.work/t/laptop-13-pro-core-ultra-x7-3...

nrp 40h ago on HN
I’m digging into this with the team, along with comments in this post. Longevity has to include a streamlined and effective support experience in addition to the hardware being repairable.

There are several changes we made earlier this year to drastically shorten the number of back-and-forths to issuing replacement parts when submitting a support request, and we’re working to streamline that further. We’re also improving the RMA->quality->engineering pipeline to make sure we capture learnings and make fixes from field failures.

rsyring 40h ago on HN
For those that don't know, nrp is Framework's founder and CEO.
layer8 39h ago on HN
It’s in his HN profile, where those who wonder can see it with one click.
Quimoniz 39h ago on HN
Thank you for seriously considering improvements to the support. I've been in need for a new Laptop to replace my old 2008-ish laptop and I am considering forking over the 3000 EUR or so for my desired configuration of a framework laptop, and reliability/support is on the top of my buying-criteria.

As I have experience working customer support in IT for a few years, I know good support is both hard and time-consuming. Systemic change is hard too. And to add to the list of difficult to impossible tasks: Staying always truthfull, while providing helpfull support-replies is like near-impossible for most organisations.

Best of success for your endeavours!

chironjit 39h ago on HN
This has been an ongoing theme with frameworks support for years.

Your customer base are above average technical people, yet you insist on treating them like clueless noobs.

Thankfully, your products in general are great when they work, but so is every other brand.

znpy 39h ago on HN
I am not affiliated in any way with framework (and I don’t even own framework hardware) but i’d like to offer a different perspective: support is an expensive part of the business, with an unpredictable volume of work, for which hiring can often be “hard”.

If you need to have strong technical people in support, you’ll be overspending in salaries for people that will likely move fairly soon to better positions (a lot of tech people started in support, i did myself).

If otherwise you don’t spend enough you get to keep the books in check but then you have support people that are not very technical and mostly read from a script.

And there are a ton of other things that happen behind the curtains as well.

Support seem easy but trust me, it isn’t.

bayarearefugee 39h ago on HN
> Support seem easy but trust me, it isn’t.

This is true of most jobs. That doesn't mean I expect companies where the job is required to routinely fail at them, mostly because they are unwilling to invest proper resources.

Framework is not unique in having shitty support. It is an absolute epidemic, which is why companies are able to get away with it. But the fact that almost everyone sucks at it doesn't mean we shouldn't call the problem out loudly when we see it.

switchbak 39h ago on HN
It being hard is no excuse for not doing it. Building long bridges is hard, doing surgery is hard. Creating a new computer company is hard. That doesn’t excuse you having a support organization that costs the company’s reputation and future viability.
znpy 16h ago on HN
> It being hard is no excuse for not doing it.

Completely useless comment.

At no point did I suggest not to do support, and Framework is indeed supporting its customers.

sharts 39h ago on HN
No company comes to mind in terms of paying support people well.

This is unfortunate because, especially for technical folk, support interaction is the backbone of user experience.

If they could innovate here a lot of things could be overlooked. Costco + early Amazon often did this pretty well tho.

eldaisfish 38h ago on HN
apple do a reasonably good job of paying support staff well enough that the support quality in person is decent.

This is the primary reason i buy used iphones - someone else pays the apple tax, i take the phone to apple and for a reasonable price, i get a new battery and i keep the value of the phone and battery for around six years. No other phone manufacturer offers that proposition.

I also chat with the apple staff while i wait and they are paid decent wages. I certainly think they deserve higher wages, but their wages are not bottom of the barrel. The strongest evidence is that staff turnover is relatively low.

bityard 38h ago on HN
A company can get away with paying their support team entry-level salaries by fostering a healthy (and dare I even say fun?) workplace culture.

One of my early jobs was working in support for a web-hosting company just after the dot-com boom. They did a lot of things wrong (or at least cheap), but they also got a lot right, especially their support teams. They understood that customer service is the face and reputation of any business, not just a cost center.

They provided good training, fostered a positive atmosphere in a variety of ways (important when your job is a constant stream of unhappy customers), and supplied a lot of free food and company outings. I wouldn't say it was an _awesome_ job, but it was a good one, especially for where I was at the time. There certainly are parts of it I miss. (Mainly some of the unique characters I got to work with. It feels like everyone in modern tech companies all have the same personality.)

sleepybrett 36h ago on HN
I think the only job that is getting replaced by ai faster than software engineering is support. So I don't think that payscale is going anywhere anytime soon.
reticulates 39h ago on HN
I have extensive support experience, you're right, support is not easy, that said, there is a very easy win: hire enthusiastic support staff that are overqualified. Customers don't like slow support but slow support is forgivable if it is good support. Framework's support as described in the post is a disaster, the worst type of support. Bad support compounds: if your support agents are doing the bare minimum to move a ticket along, they're pissing off customers and missing insight that would be valuable to the teams responsible. A customer support team of 2 technical people will deliver more for the company than a customer support team of 10 untrained people.

The quick fix for any company in this situation is to require that technical people across the company take responsibility for customer support. Of course, they don't want to, hardware designers and software engineers can't imagine anything worse, but they've got to be exposed to how real customers are experiencing their work to have any hope of doing a good job. The exposure can be direct (in a crisis) or indirect (through technical support staff relaying).

If I were the Framework CEO, I'd be taking over customer support myself. A nightmare, but necessary to understand why their support is so bad.

anentropic 38h ago on HN
This ^
egorfine 38h ago on HN
I have been a chief developer of a large service (think millions of daily users) and I had a habit of opening the support inbox and replying to users. In a typical evening hour I would clear the inbox and successfully resolve a mountain of tickets. Not to mention the important insight I was collecting from real users' feedback and real bug reports.

And this is how it should be: an enthusiastic developer can churn support tickets in their free time much much faster than dedicated support staff does full time.

exographicskip 37h ago on HN
You're doing the lord's work
pomatic 15h ago on HN
This is why everyone in our company does a bit of helpdesk work from time to time - seeing the issues at the coal face keeps things grounded.
raverbashing 38h ago on HN
> Bad support compounds

Louder for the people on the back

In the same way a bad medical diagnosis makes things harder later on, or bad legal advice, etc

But especially in the "silly" cases, this is extra disappointing. The case in TFA is not "you're holding it wrong" or "weird technical bug that happens once in a very while", it's a very clear issue of "should do A and it doesn't"

vaylian 38h ago on HN
> The quick fix for any company in this situation is to require that technical people across the company take responsibility for customer support.

I like your idea but I can also imagine that quite a few technical people will not have the necessary communication skills for being in customer support. They will need additional training if you want to unleash them onto your paying customers.

jethro_tell 37h ago on HN
That’s ok, I’ve done a thing where they pick up a 1 or 2 hour shift and look through the tickets that have high message count so or have been open too long. They get paired up with a support tech.

‘Oh, yeah we have been seeing this bug, tell the customer to flash this version.’

That’s a known issue and the fix is going through Qa

Sounds like there was an issue with that part, rma.

The amount of tickets your pros can clear while skipping the script is insane.

Additionally, it can turn up or handle bugs that aren’t handled by the script.

We all read the diagnosis on this post and knew the part was bad about 3 minutes in and it’s not even our project.

dk1138 39h ago on HN
Not only is support not easy, it is increasingly expensive.

Products are priced and launched with an initial BOM cost and anticipated labor cost for repairs. Prior to the AI buyout, service and support was already running into real issues with the costs of labor increasing very quickly. Now, the cost of service parts has also skyrocketed. This means that the initial overhead in the cost of the machine is no longer able to cover the intended dollars put aside for repair.

This is not just happening in computers. This is everywhere. Support and service were struggling everywhere coming out of COVID, prior to the jump in component costs due to labor. Now it is a bloodbath as logistics costs have also jumped due to fuel costs. Add into this that the vast majority of manufacturers build in lower-cost labor environments, but repair generally happens locally near customers. In these situations they are facing repairs that can cost more than building a new machine.

The future of support is going to be grim for the coming years.

itake 38h ago on HN
From my arm chair, I wonder if they should have just asked him to return the broken laptop and send him a new one. This way, one of their experts can have a high bandwidth experience with device in a lab.

I had a similar issue with Apple once and that was their recommendation (as it was within their return window).

nrp 39h ago on HN
It is not easy. However, it is necessary to get it right regardless.
Scramblejams 38h ago on HN
Apologies if you already know all this, but perhaps you've heard of the example of eMachines, an initially much-maligned vendor of "free" PCs in the dotcom bubble. Their product was janky and it showed, but they eventually turned it around. A big part of it was that they chose to colocate their support folks with their engineering team (I read somewhere they'd have support peeps sitting right next to engineers) and made a rigorous, concerted effort to turn every support call into a product improvement where practical. Their products just got better and better and their reputation recovered.

Perhaps that approach isn't practical today, but maybe there are some useful threads in there to pull on.

orwin 39h ago on HN
I have a counterexample, from a small company, Gong galaxy. The support is genuinely helpful, have more knowledge than anybody should expect, and is fast to respond. Even when the mistake was clearly mine they replaced the equipment I broke, and tbh, I felt like talking to the sales team each time I contacted support (and once I thought I talked to a fiberglas/epoxy expert). And I know it's not only me, a friend has had the exact same experience.

I wonder if it's because it is a small enough team that they have the correct person respond to support calls each time, but it was the best experience I ever had.

arichard123 39h ago on HN
With my support experience there was a lot of inefficiency in communications. They could save a lot of time with a form that asks for some standard information.

Also I had to make videos and photos and then email them which couldn't handle large files so I had to organise my own hosting and share links.

Basically they don't seem to have thought it through yet

msteffen 39h ago on HN
I agree that support is hard.

Since you seem to have experience with this, the principle that I've seen work "best" in my own limited experience (and I wonder how it matches with your experience) is to keep the barriers between support and product development as low as possible:

1. keep the company as small as possible in general (which lowers all communication barriers everywhere, and helps with cash flow—fewer salaries, smaller office, low overhead)

2. Early on, have the same engineers doing product development and support. Later, have heavy, regular communication between the teams (including managers and senior ICs on both sides. Maybe rotating the managers would work? I don't know. Once you have more than one level, I don't know anymore, but maybe do the same thing with directors and senior managers?). This hurts growth, because you're understaffed to begin with, and you're impeding the staff you have by giving them tons of unplanned support work. But IME it means that product development is happening at the right level of abstraction.

If the product you're building requires big company support (or training or product development), and the revenue it brings in can only support a small company, then you should change what you're building. It's very hard to change what you're building if the company is very big.

So if, for example, support is boiling because your product is flaky, and engineering is too small and too busy to fix all the problems at a reasonable pace, you probably have a design problem(s) and expanding will make it more entrenched. Instead, you should simplify the product. Then expand (with an understanding of the real costs of different parts of your vision), and repeat.

justin66 38h ago on HN
Developing cold fusion is hard. Support is a solved problem that companies fuck up because they don't want to spend the money to do it properly.
znpy 16h ago on HN
The simple reply to essentially all your points is: “seems good, doesn’t work”
14u2c 37h ago on HN
Doesn't really hold up when GPT-3.5 would have done a better job handling the support thread. There's so much they could have done to streamline and that process that costs nothing but good management. And doing so would surely save them money.
thayne 28h ago on HN
Even if you can't have high quality support for the front lines, you should still have them trained how to escalate when simple troubleshooting fails, or if the customer provides detailed technical diagnosis. In the OP, even if support didn't have the necessary technical expertise (which is understandable), they should have involved someone who did.
markus_zhang 39h ago on HN
My hunch is that they are not big enough to support such an operation. Just my hunch. I have seen many similar posts on reddit and HN and I'm very hesitant to purchase one with my own money. I wish some company can pay me :)
nik282000 39h ago on HN
I have been a part of the ThinkPad cult for 20 years now and the last model I bought (2022 P15 Gen2) has worked but is so far below the standards I am used to that I will likely not buy another. Framework was going to be my next choice but I have also seen these horror stories from time to time that don't give me a warm fuzzy, spend a month's income, feeling.

The state of hardware is about as bad as the state of software lately.

markus_zhang 38h ago on HN
I'm wondering what other choices do we have. I tried a few Dell refurbished laptops, and none of them is particularly good -- and they both broke down after 1-2 years. Now they also hiked up the price point (almost 800-1000 CAD for one used laptop) so it doesn't make sense to subscribe to something for 400-500 CAD per year.

I do have a T470S which works perfectly well, a Macbook Pro M1 16GB and hopefully soon a Mcbook Pro 2019 i7 64GB, so I'll do fine.

komali2 38h ago on HN
I was Thinkpad cult until I got the first AMD version of the framework 13 and just another anecdotal data point, it's been flawless. I've done two screen upgrades, one main board upgrade, and one keyboard replacement because I wanted a cool unlabeled transparent keyboard. I'm on the waiting list for the 13 pro chassis set as well.

I have interacted with support before when a usbc thing I got was bunk. Two emails, and then they sent a replacement. Support might be better in Taiwan though, for all I know. Certainly shipping is fast here...

KerrAvon 37h ago on HN
They are absolutely big enough to not have support suck in the manner described in TFA. Size is not an excuse.
throwaway0q5347 39h ago on HN
> Your customer base are above average technical people

I think this feels like it must be true, but is it actually, in practice? Plenty of SW people don't know a ton about HW.

I recognize that maybe all those people are on Macs :)

chironjit 39h ago on HN
Framework is still a very niche product. The average Joe likely wouldn't even consider it in their top 10 brand, even if they have heard of it. The SW engineer who is into framework at this stage of the company's lifecycle is definitely more likely than not an above average engineer.
Eggpants 39h ago on HN
Shots fired! Shields up Mr Sulu!
cheschire 38h ago on HN
A lot of average folks like to think they are above average.
cyanydeez 39h ago on HN
if you work costumer service, you'll learn very quickly to make zero assumptions about who is asking for what.
seba_dos1 39h ago on HN
> Your customer base are above average technical people, yet you insist on treating them like clueless noobs.

I have no experiences or relations with Framework whatsoever nor I intend to have, but having seen some support exchanges about products with supposedly above average technical customer base in the past I'd be willing to side with them on this particular point.

dublin 39h ago on HN
I'll say what no one here wants to say: The problem is almost certainly due to outsourced (probably Indian) tech support. No company that respects its customers can ever outsource support. There are no exceptions.
twodave 38h ago on HN
Vouched, though I understand why your comment was killed. I read it as more about a price/quality decision you disagreed with. As I understand your meaning, if most outsourced support came from Mexico you would have said Mexican. Can't really fault you that "Indian Tech Support" has become a dog whistle for identifying customer-hostile organizations. That said I've also had good experiences with Indian tech support (e.g. American Express)
illiac786 26h ago on HN
I’ll say what everyone here knows: It’s possible to keep support in house but it’s very expensive, compared with outsourcing to Bengaluru for example. It would make the prices even higher and might result in not having any customers left to respect.

I am not disagreeing on support quality, but the price is very steep and ultimately paid by the customers.

stavros 15h ago on HN
I much prefer ChatGPT to the average support person I've talked to. I emailed Huel a few months ago for an issue, with a hastily-written email that I regretted as soon as I sent it, because I knew the support person would get lost and it would take forever to solve my issue.

To my surprise, ChatGPT replied immediately with "When you said 'refund', I assume you meant 'discount', so I've taken the liberty of issuing you a new coupon, please use it for your next order and I'm sorry for the problem".

I was blown away, I fully expected four days of back-and-forth while I explain my issue with my discount code that wasn't working.

wookmaster 17h ago on HN
There are exceptions what nonsense. If the choice is go out of business or outsource it has nothing to do with respecting customers
thisislife2 15h ago on HN
Outsourcing support becomes an issue only when it isn't accompanied with competent staffing, adequate knowledge transfer and training.
GranPC 37h ago on HN
For what it's worth, I haven't had any experiences with Framework personally, but I recently bought a machine from another Linux laptop vendor. Their support has been nothing short of excellent, going as far as pointing me to kernel patches that were already mainlined but had not yet reached my distro of choice. So I don't think people NEED to be treated like dummies by default, especially when not operating at, say, HP's scale.
GCUMstlyHarmls 30h ago on HN
Why not name the company that has excellent support?
GranPC 7h ago on HN
Didn't want to sound like a shill. I was talking about StarLabs.
thayne 31h ago on HN
Not bothering to read the users report or previous interaction is just disrespectful, regardless of the technical abilities.
Affric 30h ago on HN
Yep.

Often enough customers are wrong about the root cause and their insight into fixing the problem is fairly shallow.

But knowing how you’ve treated them will make everything easier regardless. And your coworkers in any kind of service role are almost adversarial. If they weren’t incompetent you wouldn’t be dealing with a repeat customer.

When the customer is correct all along and you’ve exponentially increased how badly you’ve treated them.

figmert 14h ago on HN
I concur. Heck even I've been on that side where I've tried everything, and was convinced the product was the issue, until I spoke to support who told me what was up. Had to back down real quick.
scottmcmac 39h ago on HN
I'll just offer that I bought a Framework 13 ~4 months ago to replace a Lenovo laptop that had been flaky from the jump. Lenovo support was frustrating and useless helpping with the USB-C ports constantly dropping connectivity (I suspect a design flaw and overheating nearby) on the still in warranty laptop. So, in my n=1, the big guys support isn't great either.

So far, I'm happy with my Framework purchase... but haven't needed any support yet.

notnullorvoid 38h ago on HN
Lenovo support is atrocious. 3 months to get a laptop fixed isn't great, but it took Lenovo over 1 year to fix my broken on arrival thinkpad. 80+ hours (conservative estimate) of talking to their support staff over the phone, and many times shipping the machine to them, only to have it come back with the same issue or a new issue. Honestly with the time it took to get the laptop fixed it would've made more sense just to throw the thing in the trash and do some extra contact work.

I can't imagine how frustrating the experience would've been had I not had another machine to use for work.

Also their business practices seem extremely sketchy to me, one of the first things I asked when it arrived broken was if I could return it for a refund. They refused claiming that the return window had expired, and the window does not start when you receive the item, but instead when you order it (it took ~4 months after order to ship to me).

It was a real learning experience. Now I record every support conversation I have.

hackyhacky 37h ago on HN
I found Lenovo's customer service so bad that I couldn't even order a laptop from them. Their web site rejected my credit card, then my other credit card, and even PayPal; all of these forms of payment work perfectly with other online retailers. I was bounced between their sales department, finance department, and customer service department, none of whom could help me, each claiming that my account had been "flagged" for some undefined reason. In the end I gave up and ordered from a reseller.

You know your customer service is bad when you are unable/unwilling to accept a sale for several thousand dollars.

hedora 17h ago on HN
Out of curiosity, why did you order from a reseller at that point? There are many other brands of laptop available.
hackyhacky 12h ago on HN
Because I like Thinkpads. I think they are the second best built business laptops on the market. They work well with Linux. And I also need a laptop with a Trackpoint because I hate touchpads.
tredre3 36h ago on HN
Lenovo phone/email/chat tech support is indeed horrible to the point of being useless.

If you want actual support for your thinkpad, you need to pay the premium for on-site support. The pricing for 1-2 years is usually not that bad (relative to the price of a moderate thinkpad). The techs are hit or miss, but at least they come to your place with the parts (sometimes requiring 2 visits but it beats sending the laptop away for weeks/months).

notnullorvoid 35h ago on HN
This is how my experience resolved in the end, I was able to get support to escalate the issue and provide me with a "free" on-site visit. The tech brought a mainboard with them, replaced it, tested it, and it was finally fixed.
usr1106 23h ago on HN
We have "free" next business day onsite support from Lenovo (Europe-wide IIUC). I needed it twice in the first 1.5 years of my X1C12. First time to replace keyboard and touchpad. A 45 minute job for a trained person working really fast... Second time USB-C port stopped working (also charging) at 1700 on a Friday with an international trip starting Saturday. They already told me on Tuesday it will be repaired in the destination country. (Too late for Friday request, so formally a Monday request, fulfilled on Tuesday) But then I got another call from a service guy late Friday evening. He told me that there is a tiny reset hole in the laptop. Pressing it long enough would revive USB-C with a 50% chance. Luckily Murphy was already off-duty for the weekend.

So, experience with support was very good. I have no clue what that support option costs. It's either expensive as hell or a bad business for Lenovo if I am not an absolute exception with my failure rate.

notnullorvoid 17h ago on HN
Their on-site support is competent. The mail-in support centres in the US (Canada ThinkPad repairs also go to these) seemingly can't fix anything.
gsjhdheje 30h ago on HN
Everytime I have to help solve software engineer issues with a service that I support I ALWAYS assume they are a clueless noob..

Why?: because most of the time (>75%) its a clueless noob issue that is solved quicker by doing that.

That being said, there are ways to do it that doesn't make the person on the other side feel like you are being condescending... And it is important to strike that balance...

ChaseRensberger 39h ago on HN
a lot of negativity in the comments but i just want to say thank you for your efforts and your willingness to listen to the community. i have no doubt running a company like framework is extremely hard. i hope you guys continue to build great products for many decades to come.
philipallstar 39h ago on HN
I'm not affiliated, but I think it's important to contextualise those complaints within all the lack of complaints you don't ever hear about. Any story can seem big.
coaksford 37h ago on HN
Or contextualize it with all the complaints that never get this much attention. Oh wait, you can't contextualize something with context you don't have.

This story may not be big, but it's strongly indicative, because the problems reported show systemic issues, not one-off flaws or unlikely coincidences. Hardware has one-off flaws and unlikely coincidences. A process of handling things that revalidates an address for over a week and makes repetitive demands of customers troubleshooting the same issue is a systemic failure that is avoidable if any one of the many agents handling the issue gave a shit. This is relevant to me specifically because this kind of failure is not bad luck, it is about how the support organization is run.

Tepix 39h ago on HN
> There are several changes we made earlier this year to drastically shorten the number of back-and-forths

Given that this encounter was super recent, it must have been even worse. Hard to imagine.

mvfmg 39h ago on HN
Unfortunately this is the nth story that shares the same thing. It feels like it's done on purpose and it works. I gave up on my faulty screen replacement as the back and forth became so long and the warranty expired.

I love everything about framework as a company, but the approach to customer support has left a very sour taste.

ryandrake 38h ago on HN
To me, how a company handles returns and customers who are having difficulty says far more about that company than whether their products are cool or their technology is advanced. The only companies I have sworn off ever doing business with, they all had terrible, hostile, or indifferent customer support.
noir_lord 22h ago on HN
Agreed, an acceptable product with good support is something I'd buy again.

An amazing product with terrible support is something I would not buy again.

I have companies that are still on my shit list years later because of how badly support dropped the ball (hello HP) such that I don't care how good the next product is they'll not get another order (WinWing most recently earnt their spot on the shit list).

nrp 38h ago on HN
Could you share your ticket number or order number so that I can walk through it with the team and see what we needed to do differently?
mvfmg 37h ago on HN
Thanks, #R743331329. To be clear I stopped replying and let it die, but the burden of proof for a clearly faulty display was unreasonable
raverbashing 39h ago on HN
"Reduce the number of back and forths" look, I know that support is hard and thankless

But it sounds like the process is not working here. Support people were not identifying the glaring issues, even with the keyboard at hand

This does not inspire confidence

g-b-r 39h ago on HN
Are we sure they were people?
darksim905 39h ago on HN
to be honest, it sounds they had issues with e-mail threading/ticket system problems.
teaearlgraycold 39h ago on HN
Thanks Nirav, I trust you’ll take this seriously.
ring-c 39h ago on HN
When you will start shipping worldwide, or allow to order with delivery services? I am writing to support with this for years. You dont need money it seems.
hvb2 39h ago on HN
Shipping somewhere isn't that easy. You need to make sure you get your accounting done correctly with all the tax laws of every country you sell to etc.

It's not like selling to a country is just changing the address on the label...

pjs_ 39h ago on HN
I bought a Framework 13 Pro this year, it's absolutely sick, amazing machine, love it.
iyonn 39h ago on HN
Off the topic, but I love my framework!
stevehawk 39h ago on HN
i'm kind of surprised to see this comment. not because "oh wow the ceo is in the comments", but because your support is so difficult that it's hard to imagine it not being intentional.

I bought a chasis kit recently and the touchpad is faulty, or acting faulty ( physically getting stuck depressed), and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.

after mainboard upgrades, touchscreen upgrades, and various other upgrades over the years and being excited about framework, it's weird to have all of my enthusiasm get derailed over support for a touchpad.

all2 39h ago on HN
I don't understand why this isn't 'alright, pack it up and ship it and we'll send you a replacement'.

This should be a case of the engineering team getting the faulty device for debug (and ideally getting all the relevant information so they can do the work with some semblance of parity with the customer's setup) -- and the other half is the customer gets a functional piece of hardware to swap in.

If Framework is worried about sending out hardware before receiving hardware, the policy is a simple one; when we get the hardware, we'll ship your replacement.

---

    and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.
This is the standard 'debug over the phone' thing and engineers will do this while collecting information to try and recreate the problem you're having. It may be because the engineers are too close to the process? If you think about it, the RMA process is actually a sales process. You're essentially selling an already sold user on continuing to be a user.
cassianoleal 39h ago on HN
> I don't understand why this isn't 'alright, pack it up and ship it and we'll send you a replacement'.

Oh no. It should be "we have sent you a replacement - once it's installed and confirmed working, pack up the broken one and send us in the provided box with the provided pre-paid return label".

buildbot 39h ago on HN
Best thing about Dell for example, with an enterprise contract you can overnight parts based on a machines service tag and they come with a prepaid return label, super easy and simple.
all2 35h ago on HN
This kind of tracking is 1 week's worth of effort away from anyone in a manufacturing environment. You can vibe code the simplest CRUD imaginable and it will handle all tracking and queries for a rather large amount of items without choking (unless your agent did a terrible job or misunderstood which kinds of information need to be extracted).
bombcar 39h ago on HN
I'm fine with a middle ground - either run the support questions/tests and get the prepaid advance RMA, or say "I know what the fucking problem is, give me the advance RMA and bill me for shipping if the returned part is fine and I'm a dumbass."

In reality many people will NOT take the second option, but will be happy it was there, and the company probably never bothers billing for incorrect advance RMAs.

philistine 38h ago on HN
Exactly. Framework prides itself on its repairability, yet their support acts like any other PC manufacturer. If your stuff is so repairable, why can't I get billed the parts I know I need, and I can prove to you that this was necessary so you don't bill me?
andix 36h ago on HN
It's cheaper in the short term to just ignore complicated support issues. As long as customer demand is high and orders are coming in, it's also a successful strategy.

For example Dyson is known to provide exceptional support for their vacuums. They often even replace damage for free that was clearly the user's fault. But their products are really expensive. Probably not much more expensive to manufacture than their competitor's products for half the price. They probably don't even lose money if they have to send a replacement once.

ragall 39h ago on HN
What do you expect when the package you receive merely contains parts that were not assessed for quality, and never assembled together before ?
Ghoelian 39h ago on HN
I'm pretty sure they assemble, test, and then disassemble DIY orders.
adamsb6 38h ago on HN
The boxes on the things they don't manufacture themselves like RAM and SSD are sealed.
ragall 38h ago on HN
The story in the article proves otherwise (unless it's a complete fabrication).
simgt 39h ago on HN
I had exactly the same experience with the Desktop. PSU has a design fault, new units still ship with that fault a year after release, and customer support still asks for proof, offer all sorts of potential fixes to try and finally a full one hour procedure for a replacement of the part by another faulty one. Meanwhile a third party managed to design a better PSU for their product. It's astonishing. [0]

[0] https://community.frame.work/t/noisy-psu-fan/74751

bityard 38h ago on HN
First, I think it's dumb that Framework stuck a semi-generic PSU in the Desktop with a tiny little buzzy fan and no way to control it _while_ marketing the machine as nearly silent. Poor design and bad marketing.

Buuuut, I'll argue against the point that these are faulty units. Everyone gets the same PSU in their Desktop. That thread (and many others like it) are full of people claiming that their _specific_ PSU fan is loud and defective and demanding that Framework should replace it. And then are surprised when the replacement sounds exactly like the old one.

I bought the Framework Desktop anyway after reading these threads, and after owning it for almost a year, I have to say that the fan noise doesn't actually bother me. I have had laptops and desktops with FAR noisier fans that ran either constantly or intermittently so I guess I'm just thankful that modern PCs don't sound like vacuum cleaners anymore.

mort96 36h ago on HN
If everyone's PSU fan is loud and defective because the PSU has a design flaw, then all those people are right when claiming their specific PSU fan is loud and defective.
simgt 27h ago on HN
People in this thread aren't claiming their specific unit is faulty, everyone understood that it's a design flaw. Everyone but Framework's customer support apparently.
nrp 38h ago on HN
Could you share your support ticket or order number. I want to be able to walk through it with the team to see where we could have done better.
aeyes 38h ago on HN
Why ask for this on a public forum? Every week hold a meeting with support team lead and go through 10-20 tickets they flag as problematic. Recurring issues, tickets with a lot of back and forth, dissatisfied customers - anything.

Then take action internally.

You need to touch some ground, your work doesn't end after the sale is made.

justin66 38h ago on HN
> I bought a chasis kit recently and the touchpad is faulty, or acting faulty ( physically getting stuck depressed), and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.

I've been there with Framework. It's incredibly frustrating and I wouldn't even consider buying another one of their products until they've conspicuously turned this around over an exteneded period of time.

pacha3000 39h ago on HN
Don't let them fool you. Early 2026 I bought a 4100€ laptop from them, returned it because I didn't think it was worth the price, and they scammed me telling that I didn't return every component. First telling me RAM was missing, afterwards telling me "well there is some RAM but not all of it", without any sort of proof. Complained online, mods telling me in public "don't worry I will contact the head of support" just like nrp did, just to receive a copy pasted mail from them.

Me and my GF filed a report with every proof to mastercard for a chargeback (that framework contested), but after Mastercard investigation, they ruled in our favor.

This is a scam company. Never ever buying again.

teaearlgraycold 38h ago on HN
> This is a scam company.

Malice / incompetence etc. etc.

mort96 36h ago on HN
You don't get to steal money from your customers and blame incompetence. It's malice or malicious incompetence.
cromka 31h ago on HN
The company didn't steal from them, their employee inspecting the return did, or the 3rd party who runs the warehouse. The incompetence here is probably not accounting for the possibility of that, so no surveillance they could have checked and which on its own would likely prevent that theft. Or their logistics vendor sucks. Still incompetence and I'd account this for growing teeth stage.
mort96 22h ago on HN
"The company didn't steal, people working at the company did"? A company is made up of the people who work there. The company stole.
cromka 18h ago on HN
How do you call a company that actually scams intentionally, then? Why do you insist on being so dense and bending the logic here?
mort96 12h ago on HN
I mean I would probably call such companies scammers? If the scam involves stealing I'd say they steal?
nubinetwork 39h ago on HN
Since we're talking framework keyboards, mine likes to hold down the arrow keys randomly when I'm using them to scroll through text (as if the key thinks its still held down). I didn't buy it from you directly, so I can't really open a support ticket.
nrp 38h ago on HN
You can open a support ticket regardless. The original warranty would transfer on resale, but out of warranty, we still provide support/guidance on debugging or what part could need to be replaced.
mkozlows 37h ago on HN
Okay, this is the kind of thing where I think you need to have a better picture of what your customers want. "We'll provide guidance on debugging even out of warranty" sounds really nice, but here's what it means in practice: The support people are going to have you do a lot of very difficult debugging steps, along the lines of what this blog post talks about -- disassemble this, take a picture of that, reset this other thing. And they're going to do it one step at a time, so that every time you do one of these annoying tasks, 15 minutes later they'll send you another piece of homework involving major laptop surgery.

And this will go on for many, many steps. And when you finally get to the end of it, they'll say "sorry, you'll need to replace this keyboard, and it's out of warranty, so you'll need to pay for it yourself" and you'll have spent many hours over a period of weeks just to get the answer that you were 95% certain you were going to get in the first place.

It is true that they were out of warranty and couldn't reasonably expect a free keyboard. It is true that your support helped them identify that the keyboard was the issue, so it was a successful diagnostic in some sense. But the experience for the customer is super terrible and infuriating.

What would you want as a customer in that situation? What I'd want is to get an email like "Hey, I'm really sorry you're having that problem. As you probably know, you're out of warranty. There's a pretty good chance that you're going to just have to replace the keyboard, but if you're interested in trying to debug it to make sure the keyboard is the problem, we're happy to work with you on that." And then if I did want the debugging, I'd love to get a single document containing the debug steps that I could work through in one sitting.

That's why I think your insistence on "let me see your case to identify if any steps were done wrong here" is off-point. The problem isn't any particular debugging step or any individual case, it's that your whole process is fucked and customer-hostile in its conception.

Tade0 33h ago on HN
IIRC it's because the keyboard debounce time is set to 5ms by default, which is sort of optimistic. It's possible to increase it though:

https://github.com/FrameworkComputer/qmk_firmware/pull/57

hipsdontlie 39h ago on HN
> There are several changes we made earlier this year to drastically shorten the number of back-and-forths to issuing replacement parts when submitting a support request

Really? This was the drastically improved process? :D

welovetacos 39h ago on HN
If your support process is this awful now and you dramatically improved it already this year, one can only imagine how beyond hellish it was before. Or you're in extreme denial about successful your changes have been.

I'm rooting for you guys. Framework is a great concept and I want it to succeed. Good luck.

nrp 38h ago on HN
We're improving, and we're never going to stop improving. Partially, the expectations customers have for us are correctly higher for us in 2026 after five years of building and shipping products than in 2021 at our first launch.
cachius 39h ago on HN
Please do, so that the 'support' side quest doesn’t stain the main one: great, open engineering.
swalsh 39h ago on HN
Thing is, support is not a side quest. It's make or break for a company.
mjamil 39h ago on HN
Given the near unanimity of negative feedback, I’d consider something more drastic/effective than this, nrp.
komali2 38h ago on HN
Unanimity? It's not like people make blog posts that front page HN about good support stories.
broodbucket 38h ago on HN
Most people don't need support to be fair.
rationalist 37h ago on HN
The fact that an LLM-submission is being upvoted so much, is because it is news (unusual).
mkozlows 37h ago on HN
Yes, but usually when a company has good support with exceptional instances of bad support, a single complaint getting to the front page doesn't get a pile of other people saying "holy shit yes, their support is so terrible" and does get people saying "wow, my experience couldn't have been more different, some of the best support I ever got."
justin66 37h ago on HN
A drastic step, in the sense that it would require an effort, which could be made would be to repair or replace the defective 11th gen motherboards.

Just a little background: https://www.youtube.com/watch?v=6UUOyGd5UkU

cf100clunk 39h ago on HN
nrp, do you employ IT helpdesk software that is ITIL compliant?
paxy 39h ago on HN
What is your support story for those who don’t make the HN front page?
Washuu 38h ago on HN
The treatment of the article author is the same treatment that I experienced with my launch Framework. Framework customer support is absolutely horrid and I had to fight for a month to get the input cover replaced along with ridiculous steps to prove that it was faulty. This was back in 2022. Nothing has changed in four years.

Editing this to add on: A firmware update bricked the TPM functionality somehow. :D

reissbaker 38h ago on HN
FWIW I am a happy Framework owner, but I have one suggestion: I think you should stop shipping disassembled laptops. Instead you should ship them assembled and QA-ed, including the Linux ones, which currently are DIY-kit-only.

It's a bit fun the first time to assemble from scratch, but it's annoying the second time, and it would mean you know the laptops actually work when they get sent out! The article's issue for example would've been caught if someone had assembled the laptop and powered it on, and not then disassembled it again for the experience of assembling a DIY laptop kit. My understanding is that this is actually the process Framework uses — that is, assembling and then disassembling — and I can't imagine disassembling has a zero percent fault rate, nor does asking the customer to re-assemble.

Your laptops are really nice and I want you to succeed. There's a reason everyone else ships assembled laptops though, and I think you should do it too. It wouldn't harm repairability, or compromise your principles: I think it would just reduce churn and support tickets from broken parts and laptops, and reduce customer frustration.

0xCMP 38h ago on HN
I saw a BTS video they made that showed they actually assembled the full computer and then disassembled it to ensure this exact issue.

You'd think that would make the disassembled version more expensive to produce.

mkozlows 37h ago on HN
The 13 Pro comes with a fully assembled and tested Ubuntu one, priced under the DIY. They really don't want you to DIY these days.
reissbaker 28h ago on HN
Ah, that's very nice! I believe when I ordered my 13 Pro, using a Linux distro required DIY/assembly (I have a 13 Pro and I love it! I just... really do not want to assemble a laptop again, and can easily see how this would cause QA headaches as described in the article, since they also mention needing to assemble the laptop.). I hope they continue more of that.
mkozlows 27h ago on HN
Nope, 13 Pro preorders had the Ubuntu one from minute one, and you could have saved some cash buying it, too. (I had a Batch 2 DIY, then realized that the math worked out that way and switched it over to a pre-built -- which was a little sad because I lost the cool keyboard, but even if I buy that later, it will have been cheaper.)

Showing 400 of 607. Read the rest on Hacker News

Comments are loaded live from Hacker News and are not stored by Mid or Real.